Panasonic WV-CW384E Operating Instructions Manual

Also see for Super Dynamic III WV-CW380: Brochure & specs Brochure & specs

Contents

Panasonic WV-CW384E Operating Instructions Manual Manual pdf 15 page image

15b Be sure to view the monitor for adjustmentwhen the camera angle is adjusted.Supply power to this unit, connect the monitor for adjust-ment (e.g. a small LCD) to the monitor output jack, andadjust the camera angle (turn off the power after view angleadjustment for safety).1. Loosen the 4 fixing screws of the lens cover to removethe lens cover.2. Connect the monitor for adjustment to the monitor out-put jack.Note:• The plug dimensions in the illustration below shall beobserved for the monitor for adjustment.3. Repeat the steps (1) and (2) to adjust the cameraangle.(1) Loosen the panning lock screw and rotate the cam-era head horizontally to adjust panning.(2) Loosen the tilting lock screw and rotate the camerahead vertically to adjust tilting.(3) Tighten the panning lock screw and tilting lockscrew after camera angle adjustment.Fixing screw x4Lens cover Monitor output jack(ø3.5 mm mini jack (monaural))9 mm or less9 mm or lessStraight type L-typeTilting lock screwPanning lock screwImportant:• After camera angle adjustment, the panning lock screwand tilting lock screw shall be securely tightened.Recommended tightening torque: 2.45 N·mNotes:• Use a hexagonal wrench with width across flats of 4mm (locally procured) to loosen or tighten the panninglock screw and tilting lock screw.• Approximately 1 rotation of loosening the panning lockscrew and tilting lock screw allows camera angleadjustment. Do not loosen the screws beyond necessi-ty.• The camera body shall be held when the panning lockscrew or tilting lock screw is loosened.• Focus adjustment ( page 16) shall be performedwhen panning and tilting adjustments are performed.