Panasonic WJ-NX400K Important Information Manual

Also see for WJ-NX400K: Operating instructions Installation guide Installation guide Important information Operating instructions

Panasonic WJ-NX400K Important Information Manual Manual pdf 15 page image

15Front view① Error indicator [ERROR]Blinks when an error that can become a problem for therecorder to run the system occurs.Blinks red: System error (Network link error, HDD error,Recording error, etc.)Blinks orange: Thermal error, cooling fan malfunction, etc.Shows a solid light when automatically reset from an error status.② Alarm indicator [ALARM]Blinks when an alarm occurs, and lights when the alarmoutput stops. This indicator will go off when the [Reset]button (☞ Operating Instructions (PDF)) is clicked.③ LCDIndicates the day and time, the status of the recorder (errorstatus, etc.), or the name of the functions available usingthe buttons on the front panel of the recorder. The recorderrequires a main monitor or a PC for settings. You cannotsetup the settings using the LCD of the recorder only.④ Buzzer stop button [BUZZER STOP]Press this button to stop the buzzer that started sounding atan alarm/error occurrence. Refer to the Operating Instruc-tions (PDF) for further information about alarms and errors.⑤ HDD access indicator (1~9)It transmits the HDD status indicator and the HDDaccess indicator installed in the front cover.HDD status indicator (left side)Indicates the operational status of the respective harddisk drive. (☞ Page 17)HDD access indicator (right side)Indicates the status (access/failure) of the respectivehard disk drive. (☞ Page 17)Basically, each indicator will indicate the status of therespective HDD units (HDD unit 1 to 9), but eachindicator will be the same when the system error occurs.Important:• When the indicator lights red in the RAID1/RAID5/RAID6mode, replace the HDD unit with the error immediately.Contact your dealer about replacing the HDD unit.• In the RAID5 mode:When 2 or more HDD access indicators light/blink red, itmay be impossible to recover data on the respectivehard disk drives.• In the RAID6 mode:When 3 or more HDD access indicators light/blink red, itmay be impossible to recover data on the respectivehard disk drives.⑥ Key holeUse the provided key to open/close the front cover. Keepthe key in a safe place.Lock the front cover: Insert, push and turn the key to theleft.Unlock the front cover: Insert, push and turn the key tothe right.⑦ Copy port (USB3.0) [COPY]Connect an external storage device (external Hard diskdrive, USB memory) to this port and copy images andaudio recorded on the hard disk drive. An externalstorage device can also be connected to the copy porton the rear. Use either of them.* Mouse connection is also available.⑧ Mouse connection port (USB2.0) [MOUSE]The provided mouse is connected to this port. A mousecan be connected to the mouse connection port on therear. Use either of them.⑨ Operation indicator [OPERATE]Lights when the power is on.➀⑦⑧⑨ ⑩ ⑪ ⑫➁ ➃ ⑥➄➂Major operating controls and their functions