17 Connections with any Existing Network System Connections with a Broadband WAN NetworkCaution: The number of clients that can be connected to each WJ-HD88 is defined in the next table. According to differencesin the network communication protocol, the number of clients that can be connected can differ. In the next table, the num-ber of clients that can be connected is defined for the TCP/UDP protocol and the MCAST protocol, independently of eachother.Windows xpMicrosoftPC/AT CompatibleWindows xpMicrosoftPC/AT CompatibleLAN cable(Not provided: 10BASE-T/100BASE-Tx, Category 5, Straight)HUB/RouterIP Address: 192.168.0.1Subnet Mask: 255.255.255.0LANIP Address: 192.168.0.88Subnet Mask: 255.255.255.0Gateway Address: 192.168.0.1IP Address: 192.168.0.x (x except 0, 1, 88, 255)Subnet Mask: 255.255.255.0Gateway Address: 192.168.0.1ERRORALARMHDDTIMEROPERATE1 2 3 4 56 7 8 9 0MENUESCALARMRESET SEQUENCESTILLPAUSE REV FWD SKIPSTOP PLAY RECCOPY 2SETDigital Disk Recorder WJ-HDWANWindows xpMicrosoftPC/AT CompatibleServer Port: 2000 (changeable)Alarm Port: 4000 (changeable)Forward (WAN → DVR)UDP Port: 9998 (fixed)TCP Port: 2000 (depends on therecorder settings)Broadband router AForward (WAN → PC)UDP Port: 999 (fixed)UDP Port: 4000 (depends on therecorder settings)Broadband router BERRORALARMHDDTIMEROPERATE1 2 3 4 56 7 8 9 0MENUESCALARMRESET SEQUENCESTILLPAUSE REV FWD SKIPSTOP PLAY RECCOPY 2SETDigital Disk Recorder WJ-HDNotes:1. Broadband router A can only connect one WJ-HD88. (Each WJ-HD88 should beassigned a Global IP address.)2. Broadband router B can only connect one PC/AT compatible machine.(Each compatible machine should be assigned a global IP address.)User type TCP/UDP MCASTManager 1 person 1 person8 persons Unlimited in the same subnet1 person 1 person4 persons Frame play not available1 person 1 personRemote monitoringRemote playback/net backupFrame playRemote talk

operating instructions

Important Safety Instructions

Limitation of Liability

Precautions

Preface

Major Operating Controls & Their Functions

rear view

Installation

System Composition and Connections

Network System

Setup Procedures

turning the power off

Operation

camera control

Setup

search and playback

disk management

default settings

System Screen Explanations

Setup Menu Parameters and Initial Setup Values

Operation using the system controller

Troubleshooting

Specifications

I Table of Recording Length

Panasonic WJ-HD88 Operating Instructions Manual

WJ-HD88

Trademarks and Registered Trademarks

Installation of the WJ-HD88 Monitoring System Software

System Setup and Operations

Remote Monitoring Control

Disconnection of the Channel for Remote Monitoring

Control Playback Images

I System Control Panel

Recorder Configuration

Recorder Reboot ("Recorder Reboot")

Frame Playback ("FramePlay")

Monitoring System Configuration

Local Playback

Electro Map ("ElectroMap")

Sequential display

Remote Talk

Operation on the Multiscreen Selection Control Area

Operation of the Image Channel Selection Panel

Operation on the Recorder Information Area

Local Playback Starting

Local Playback File

Record Search ("Search File")

USB Equipment

Operation on USB Client

Alarm Center

Alarm Center Port Setup

Time Synchronization among Recorders

Starting of SetRecorderTime

Panasonic WJ-HD88 Operating Instructions Manual

Product

Learn More

Legal