Panasonic WJ-HD88 Network Operating Instructions

Also see for WJ-HD88: Brochure & specs Operating instructions

Panasonic WJ-HD88 Network Operating Instructions Manual pdf 31 page image

31In the map, the icon indicates the registered recorder. The icon indicates that the channel (camera) isconnected (active). The icon indicates that the channel (camera) is not connected (not active).When the icon (not active) is right-clicked, the pop-up menu will be displayed. Select "Connect" on the pop-upmenu to activate the channel (establish the connection). Refer to "Remote Monitoring" on page 8 for further informa-tion.When "Connect" is selected, the progress bar for the connection of the channel will be displayed. If eight channelsare already in use or when no available area on the image display area, it is impossible to establish the connection.When the icon (active) is right-clicked, the pop-up menu will be displayed. It is possible to disconnect theselected channel by selecting "Disconnect" on the pop-up menu.When the "ElectroMap" window is open, images from the channel displayed in the "ElectroMap" window are beingdisplayed in the image display area. The recorder in the "ElectroMap" window and its channels will be displayed ingreen highlight. When a channel is selected in the "ElectroMap" window, images from the selected channel will alsobe displayed in the image display area with green outline. When a recorder is selected in the "ElectroMap" window,images from all the channels connected to this recorder will be displayed in the image display area with green out-line.11. Sequential DisplayIt is possible to display images from multiple cameras sequentially using this function. Before starting sequential dis-play, it is necessary to close the remote playback window, and then click the [Sequential Display] button on thesystem control panel.When the [Sequential Display] button is clicked, the sequential display function will start and the [Sequential Display]button will change into the [Sequential Display Stop] button .The sequential display function starts displaying images from the channels connected to the first recorder. When theset dwell time has passed, the sequential display function starts displaying images from the channels connected tothe next recorder. The sequential display function continues until the set total time for the sequential display haspassed.The sequential display will be paused when alarm recording starts, and resumes when alarm recording ends.If any error occurs in the connection with the recorder, the sequential display will stop.When the sequential display button is clicked in the process of the sequential display, the sequential display willstop.Even when the sequential display stops, the currently display images will be kept on displaying.