Panasonic WJ-HD100 Operating Instructions Manual

Also see for WJHD100 - DIGITAL DISC RECORDE: Specifications Operating instructions Operating instructions Specification sheet

Panasonic WJ-HD100 Operating Instructions Manual Manual pdf 37 page image

38 Operating Alarm Suspending Alarm InputThis may be convenient to be used during setup procedures or when you need not alarm recording. If this is set to ON, thealarm input is ignored and the recorder performs as follows.• The alarm event will be logged in the history.• The recorder does not enter alarm recording• The recorder does not sound buzzer• The ALARM SUSPEND indicator lights.1. Press the LCD button downward to display [Alarm Suspend] on the LCD.2. Select either ON or OFF bypressing the LCD button tothe left or right.ON: Alarm input is suspend-ed.OFF: Suspension is reset. Alarm History SearchAlarm history is listed in chronological order with eventnumber, date, time, availability of recorded picture, and theactivation source on the monitor.• To browse history1. Hold down the LCD button center for 2 seconds.The monitor displays ALARM RECALL while thehighlighted line on the monitor is also displayed onthe LCD.2. Rotate the JogDial to scroll up or down the list.3. Hold down the LCD button center for 2 seconds togo back to the previous status.• To search for playback1. Select the desired alarm event by rotating theJogDial.2. Press the [B PLAY] button to play back the record-ed picture. The LED lights. The ALARM RECALLdisappears.3. Press the [STOP] button to stop playback.The ALARM RECALL appears on the monitor.4. Hold down the LCD button center for 2 seconds toquit alarm history search.• To erase the stored history1. Move the cursor to “PUSH JOG→DATA CLEAR”,then press the JogDial.All alarm event records on the list are erased.Note: You can access to the pictures recorded onthe disk by time & date search after the erasure.Note: There may be cases that the displayed asterisk* onthe alarm history does not stand for the correspondingrecorded picture, because of overwriting. This happenssometimes when the DISK END MODE is set to CON-TINUE.T: Alarm terminal was activatedV: VMD was activatedAsterisk *: Corresponding alarm picture is recorded onthe diskNo asterisk: No picture is available.DISPLAY SELECTLCD CONTRASTOPERATETIMER HDDALARMSUSPENDDAYLIGHTSAVINGFULLLOCKMEMORY CARD DISPLAY SELECT STOP PLAY RECPUSH– PAUSE SETALARM SEARCH STEP REW/FFPLAY MODE SELECT/ // /SETU/ESCLCD CONTRASTDigital Disk Recorder WJ-HD2 (left or right)1 (downward)Lights while suspending the alarm.ALARM RECALL 1 OF 10NO DATE TIME ALM99 JUN 9.00 00:00:00 * T98 JUN 1.00 02:34:56 T97 JUN 1.00 01:10:01 * V96 MAY31.00 23:34:45 V95 MAY30.00 02:00:20 * T94 MAY14.00 05:30:31 * T93 MAY 7.00 23:00:59 T92 MAY 6.00 22:05:50 V91 APR14.00 23:00:59 * T90 APR14.00 16:06:34 * VALARM RECALL 10 OF 10NO DATE TIME ALM4 FEB20.00 00:00:00 * T3 FEB11.00 02:34:56 T2 JAN15.00 01:10:01 * V1 JAN 1.00 23:34:45 VPUSH JOG→ DATA CLEARIntelligent Security & Fire