Panasonic Viera TX-P42U20E Operating Instructions Manual

Also see for Viera TX-P42S20E: Service manual Service manual Operating instructions

Panasonic Viera TX-P42U20E Operating Instructions Manual Manual pdf 38 page image

EXITMENUINPUTTVjklghi mnotuvpqrs wxyzabc def38Timer ProgrammingTimer Programming from MenuThe Timer Programming menu allows you to choose programmes that you wish to record or remindwatching. At the correct time, the TV will tune to the correct channel automatically to record even if theTV is in Standby mode.TV Guide may also be used to set timer programming (p. 19) .This function is not available in Analogue mode.●Timer Programming only works reliably if correct time information is received via the signal from the broadcaster●or service provider.For recording using Timer Programming, the TV must be either On or in standby. For reminders to be displayed,●the TV must be OnNo other channel can be selected while Ext Rec. of Timer Programming is in progress.●It may not be possible to record an encrypted programme (which is copy-protected).●When recording programmes, be sure to make the proper settings on the recorder connected to the TV.●If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 52 and p. 53)and the “Link Settings” (p. 28) are completed, no setting of the recorder is required. Also read the manual of therecorder.If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, set “Q-Link” in the Setup Menu●(p. 28) to the connected terminal (AV1 or AV2), and make timer programming of the recorder. For preparations ofa recorder, read the manual of the recorder.Recordings are always in standard definition composite video via SCART, even if the original programme is in●high definition.2 mins. before the starting time, a reminder message appears if you are watching TV.●To remove the message and start the programming•To cancel the programming• EXIT1 Select the mode you want to setp. 14TV2 Display the menuMENU3 Select “Setup”Main MenuPictureSoundSetupaccessselect4 Select “Timer Programming”Setup Menu 1/2Off Timer OffAccessLink SettingsChild LockDVB-C Tuning MenuLanguageDisplay SettingsCommon InterfaceSystem MenuTimer Programmingaccessselect5 SetTo return to TV■ EXITTo unlock the tuner■(stop recording)EXIT