Panasonic Viera TX-P42U20E Operating Instructions Manual

Also see for Viera TX-P42S20E: Service manual Service manual Operating instructions

Panasonic Viera TX-P42U20E Operating Instructions Manual Manual pdf 31 page image

How to Use Menu Functions●Basic31Menu Item Adjustments / Configurations (alternatives)SetupSystem MenuShipping Condition Resets all settings, for example, when moving house (p. 44)System Update Downloads new software to TV (p. 45)Software Licence Displays the software licence informationSystem Information Displays the system information of this TVOther SettingsAV Colour System Selects optional colour system based on video signals in AV mode(Auto / PAL / SECAM / M.NTSC / NTSC)GUIDE Plus+SettingsUpdate Performs the update of the GUIDE Plus+ schedule and advertising informations forthe GUIDE Plus+ system (p. 19)Postcode Sets your postcode to display advertisements in the GUIDE Plus+ system (p. 19)SystemInformation Displays the system information of the GUIDE Plus+ systemAuto StandbySets the time the TV automatically goes to Standby mode when no operation isperformed for the selected times (Off / 2 / 4 hours)Starting Timer Programming automatically does not affect this function.●Automatic input switching with the connected equipment affects this function and●time-count will be reset.The notification message will appear 3 minutes before going to Standby mode.●Power Save Reduces brightness of picture to economise on power consumption (Off / On)16:9 OverscanSelects the screen area displaying the image (Off / On)On : Enlarged the image to hide the edge of the image.Off : Displayed the image in the original size.Set to “On” if noise is generated on the edge of the screen.●This function is available when aspect is set to Auto (16:9 signal only) or 16:9.●This function can be memorized separately for SD (Standard definition) and HD●(High definition) signals.Time Zone Adjusts the time dataThe time data will be corrected based on GMT.●Set to “Auto” to adjust the time automatically according to your area.●Refresh Rate Changes the image processing of the panel (depending on the input signal)(50Hz / 100Hz)Set to “100Hz” normally●DVI Input SettingChanges the black level in the image for HDMI input mode with DVI input signalmanually (Normal / Full)When the DVI input signal from the external equipment, especially from PC, is●displayed, the black level may not be suitable. In this case, select “Full”.The black level for HDMI input signal will be adjusted automatically.●A different menu will be displayed in the mode of SD Card. (p. 47 and p. 49)●Only available items can be selected.●