Using Network Services682 Access the encryption key input modeEncryption Key SettingConnection will be made with the following settings:-SSID : Access Point AAuthentication type : WPA-PSKEncryption type : TKIPPlease input the encryption key.Encryption key• If the selected access point is not encrypted, the confirmation screen will bedisplayed. It is recommended to select the encrypted access point.3 Enter the encryption key of the access point (Set characters one by one)A B C D E F G H I J K L M N O P Q R S TU V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #a b c d e f g h i j k l m n o p q r s tu v w x y z ( ) + - . * _Access Point SettingsEncryption keyselectsetStoreBACK/RETURN• You can set characters by using numericbuttons.4 Select [Yes]NoAccess Point SettingsEncryption key is set to:-XXXXXXXXSelect ‘Yes’ to confirm.Select ‘No’ to change.Yesconfirmselect• To re-enter the encryption key, select [No].■ [Manual]You can setup SSID, authentication type, encryption type, and encryption key manually.Follow the on screen instructions and set manually.• When you use 11n (5 GHz) for the wireless system between the Wireless LAN Adaptor and access point, please select [AES]for the encryption type.Please input the SSID.Access Point SettingsSSID XXXXXXXNoSSID SettingYesSSID is set to:-XXXXXXXSelect ‘Yes’ to confirm.Select ‘No’ to change.Authentication Type SettingsConnection will be made with the followingsettings:-SSID : XXXXXXXPlease select the authentication type.WPA2-PSKWPA-PSKShared keyOpenUpdate TV’s softwareAccesses the specific website to update TV’s software and search if any software updates are available.Select [Software Update]ab-cd-ef-gh-ij-klConnection TestNetwork TypeAccess Point SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateMAC AddressNetwork SetupWiredAccessaccessselect• Follow the on screen instructionsNoteab-cd-ef-gh-ij-klMAC AddressNetwork Setup [MAC Address]• MAC address is a unique address that identifies hardware in the network.(for information only)