Identifying Controls●Quick Start GuideCommonInterfaceHDMI 3AV 3FTVVLRAV9TVSD Card slot (p. 46)CI slot (p. 43)HDMI3 terminal (p. 59)AV3 terminals (p. 59)Headphones jack (p. 59)Remote control signal receiverDo not place any objects between the TV remote control signal●receiver and remote control.Function selectVolume / Contrast / Brightness / Colour / Sharpness /●Tint (NTSC signal) / Bass (“Music” or “Speech” mode in theSound Menu) / Treble (“Music” or “Speech” mode in theSound Menu) / Balance / Auto Setup (p. 32 and p. 33)Power and Timer LEDStandby: red●On: greenTimer Programming On: orangeTimer Programming orDirect TV Recording is in progress: orange (flash)Standby with Timer Programming On orDirect TV Recording: red with orange flashWhen using the remote control, indicates the TV●has received a command.Mains power On / Off switchSwitch On to turn on the TV or turn the TV to Standby mode by the remote control●Increases or decreases the channel position by one.When a function is already displayed, press to increase or decreasethe selected function.When in Standby mode, switches TV On (Press for about 1 second).Changes the input modeC.A.T.S. (Contrast Automatic Tracking System) sensorSenses brightness to adjust picture quality when “Eco Mode”●in the Picture Menu is set to “On” (p. 26)Using the On Screen DisplaysMany features available on this TV can be accessed via the On Screen Display menu.How to use remote control■Move the cursor / select the menu item Move the cursor / adjust levels / select froma range of optionsAccess the menu / store settings afteradjustments have been made or optionshave been setRETURNReturn to the previous menuMENU Open the main menu EXIT Exit the menu system and return to thenormal viewing screenON SCREEN HELP Instructions box - Operation guide■Example (Sound Menu):Select EXITChangeRETURNPage upPage downSound Menu 1/2Mode MusicBassTrebleBalanceHeadphone VolumeOffSurroundVolume CorrectionSpeaker Distance to Wall Over 30cmMPX Stereo011000Operation guide will help you.