Panasonic Viera TX-P42S20L Operating Instructions Manual

Also see for Viera TX-P42S20L: Service manual Service manual

Panasonic Viera TX-P42S20L Operating Instructions Manual Manual pdf 34 page image

DIRECT TV RECASPECTOPTIONTEXTPROGRAMMESTTL INDEX HOLDNAVEXITRETURNINPUTTVjklghi mnotuvpqrs wxyzabc defMENU341 Select DVB-C or DVB-Tp. 14TV2 Display the menu MENU3 Select “Setup”Main MenuPictureSoundSetupaccessselect4 Select “DVB-C Tuning Menu” or “DVB-T Tuning Menu”Setup Menu 1/2Off Timer OffAccessAccessLink SettingsChild LockDVB-T Tuning MenuDVB-C Tuning MenuLanguageDisplay SettingsCommon InterfaceSystem MenuTimer Programmingaccessselect“DVB-C Tuning Menu” is available in●DVB-C mode only.“DVB-T Tuning Menu” is available in●DVB-T mode only.5 Select one of the following functions and setDVB-C Tuning MenuFavourites Edit AccessChannel ListAuto SetupManual TuningUpdate Channel ListNew Channel MessageSignal ConditionAccessAccessAccessAccessOnAccessAttenuator OffAuto Setup● “Retuning from Setup Menu” (p. 32 and p. 33)accessselectThe function items vary depending on●the country you select (p. 12).You can retune channels or make your favourite channel lists, skip unwanted channels, etc.To return to TV■ EXITTuning and Editing Channels(DVB)Update DVB channel automatically Update Channel ListYou can add new channels, delete removed channels, update channel name and position automatically toChannel List.DVB-T Update Channel ListCH Channel Name Type QualitySearchingThis will take about 3 minutes.Free TV: 0Progress CH 21 68Pay TV: 0 Radio: 0Channel List is updated while keeping your settings in Favourites Edit,●Channel List, Child Lock, etc.Display a notification message New Channel MessageSelects whether to give a notification message when a new DVB channel is found. (Off / On)New channels found!Press OK to update channel listPress EXIT to ignore.Selecting OK will perform “Update Channel List”.●Check DVB signal Signal ConditionSelects a channel and checks the DVB signal condition. To change the channel●DVB-T Signal ConditionChannel Name 70 CBBC ChannelSignal QualitySignal StrengthNetwork Name0 100 10WenvoeBit Error Rate 0.00E+00Parameter [CH62] 802,00 MHzA good Signal Strength is not an indication of suitable signal for DVB reception.Please use the Signal Quality indicator as follows:Signal Quality:Green bar● GoodYellow bar● PoorRed bar● Bad (Check the Terrestrial aerial or cable)Reduce the DVB-C signal AttenuatorIf the DVB-C signal is too strong, the interference may occur. In this case set to “On” to reduce the signalautomatically.This function is available only for DVB-C signal.●