Panasonic Viera TX-P42G30E Operating Instructions Manual

Also see for TX-P42G30E: Operating instructions Service manual

Contents

Panasonic Viera TX-P42G30E Operating Instructions Manual Manual pdf 68 page image

Using Media Player68■ How to operate in the playbackExample : PlaybackDas ErsteUSB 00:15:3900:02:05EXITRETURNManual skipOperation guideInformation banner• To display / hide the operation guide and information banner• To operate the playbackRewind[Manual skip]• Press to skip forward about 30 seconds• Press and hold to skip backward about 15 secondsPause / PlaybackFast forwardStop• To repeat between the starting point “A” and finishing point “B” • To the previous chapter(red)• To the next chapter(green)Set “A” and “B” in order(blue) • The points will be reset by pressing this button again orother operations.• To change aspect • To display the subtitle (if available) • To return to listASPECT STTL BACK/RETURN• You can also use the following buttons. (p. 28)Set the position to “TV”DVD/VCR TV• To confirm or change the current status (if available) “Display the selectable settings for the current status” (p. 20)■ Chapter ListYou can start playback from the chapter list you select.• A recorded content is automatically divided into chapters (about five minutes for each).• The chapter list is not displayed while the selected content is being recorded.To play back from the chapter list(yellow)00:00:00 00:05:00Chapter ListplaybackselectNote• Depending on the recorded programmes, some playback operations may not work properly.■ Change the deviceYou can change to the other device directly in the same mode if two or more devices are connected.1 Display theoption menuOPTION2 Select [Drive Select]Option MenuCreate GroupRelease GroupDrive SelectContents SelectChange Protect Statusaccessselect3 Select the device you want to access toUSB HDD1 USB Flash...Drive SelectUSB HDD1EXITSelectRETURNAccess SD Card accessselectIf you select the SD Card or USB Flash Memory, also change thecontents to enjoy photo, video or music.• To change the contentOPTIONaccessselect [Contents Select]