Panasonic Viera TX-26LXD65F Operating Instructions Manual

Contents

Panasonic Viera TX-26LXD65F Operating Instructions Manual Manual pdf 17 page image

Advanced17• How to Use Menu Functions(picture, sound quality, etc.)Adjustments / Configurations (alternatives)Basic picture mode (Dynamic / Normal / Cinema)• Set for each input signal Viewing mode DynamicAdjusts backlight, contrast, brightness, colour, sharpness for each picture mode to suityour tasteContrastBrightnessColourSharpnessBacklightAdjusts tint of image• For NTSC signal reception only TintChooses the colour balance of the entire image (Cool / Normal / Warm) Colour balance NormalAutomatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)• Not valid on HDMI and HD signal P-NR AutoAutomatically makes still pictures and slow pictures look more vivid (Off / On)• For PAL or NTSC signal reception only• Not valid on RGB, S-Video, components and HDMI• Cannot be used with DVB3D-COMB OnAdjusts the output level of deep bass (High Low) BassAdjusts the output level of high-pitch, shrill sound (High Low) TrebleAdjusts volume level of right and left speakers BalanceAdjusts the volume of the headphones (High Low) Headphone volumeSelect stereo / monaural (Mono / Stereo)• Normally: Stereo• Stereo signal cannot be received: Mono• M1 / M2: Available while mono signal is transmitted• Cannot be used with DVBMPX StereoImproves sound quality for music and dramas (Music / Speech) Mode MusicGives a greater spatial effect by using dynamic enhancer (Off / On) Ambience OffChooses according to the signal when HDMI is connected(Auto / Digital / Analogue) (p. 34)• HDMI2 terminal is for digital signal onlyHDMI1 input AutoChooses the connector to which a Q-Link compatible equipment is connected(Off / AV1 / AV2) (p. 30) Q-Link AV1Control with HDMI function (Off / On) (p. 27) Control with HDMI OnChooses the signal to be transmitted from the TV to Q-Link(Analogue / DVB / AV2 / AV3 / Monitor)• Monitor: Image displayed on screen• Component signals cannot be outputtedAV1 out MonitorChooses the signal to be transmitted from the TV to Q-Link(Analogue / DVB / AV1 / AV3 / Monitor)• Monitor: Image displayed on screen• Component signals cannot be outputtedAV2 out MonitorTeletext display mode (TOP (FLOF) / List) (p. 12) Teletext FLOFSets the time the unit automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes) Off timer OffSelects teletext language (West / East1 / East2)• West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish• East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian• East2: Czech, Hungarian, Lettish, Polish, RumanianText language WestEdits channels (p. 20) Programme edit AccessSets channels automatically (p. 20) AccessAuto setupSets channels manually (p. 20) Manual tuning AccessFine tuning of channels (during rain, etc.) Fine tuningSelects optional colour system depending on video signals (Auto / PAL / SECAM / M.NTSC) Colour system AutoAdjusts volume of individual stations Volume correc.Edits or setups DVB channels (p. 18) DVB Setup Menu AccessChanges language for on-screen displays System language AccessResets all settings, for example, when moving (p. 32) Shipping condition AccessSelects optional colour system based on video signals in AV mode Colour system AutoAdjusts volume for AV and HDMI mode Volume correction• In AV mode, the Sound menu and Setup menu give a smaller number of options.