FAQs, etc.• Specications• LicenceTX-26LX80FPower Source AC 220-240 V, 50 HzPowerConsumptionAverage use 92 WStandby condition 1 WDisplaypanelAspect Ratio 16:9Visible screen size 66 cm (diagonal)575 mm (W) × 323 mm (H)Number of pixels 1,049,088 (1,366 (W) × 768 (H))SoundSpeaker 189 mm × 42 mm × 2 pcs, 8 Audio Output 20 W (10 W + 10 W), 10% THDHeadphones M3 (3.5 mm) stereo mini Jack × 1PC signals VGA, WVGA, SVGA, XGA, WXGAHorizontal scanning frequency 31 - 48,5 kHzVertical scanning frequency 60 HzReceiving Systems /Band namePAL B, G, H, I, SECAM B, G, SECAM L / L’VHF E2 - E12 VHF H1 - H2 (ITALY)VHF A - H (ITALY) UHF E21 - E69CATV (S01 - S05) CATV S1 - S10 (M1 - M10)CATV S11 - S20 (U1 - U10) CATV S21 - S41 (Hyperband)PAL D, K, SECAM D, KVHF R1 - R2 VHF R3 - R5VHF R6 - R12 UHF E21 - E69PAL 525/60 Playback of NTSC tape from some PAL Video recorders (VCR)M.NTSC Playback from M. NTSC Video recorders (VCR)NTSC (AV input only) Playback from NTSC Video recorders (VCR)Aerial - Rear VHF / UHFOperating Conditions Temperature : 0 °C - 35 °CHumidity : 20 % - 80 % RH (non-condensing)Connection TerminalsAV1 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, Q-Link)AV2 (Scart terminal) 21 Pin terminal (Audio/Video in, Audio/Video out, RGB in, S-Video in, Q-Link)AV3VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 )S-VIDEO Mini DIN 4-pin Y:1.0 V[p-p] (75 ) C:0.286 V[p-p] (75 )AUDIO L - R RCA PIN Type × 2 0.5 V[rms]COMPONENT VIDEO Y 1.0 V[p-p] (including synchronization)P B , PR ±0.35 V[p-p]AUDIO L - R RCA PIN Type × 2 0.5 V[rms]OthersHDMI1 / 2 TYPE A Connectors • This TV supports “HDAVI Control 3” function.PC HIGH-DENSITY D-SUB 15PIN R,G,B/0.7 V[p-p] (75 )HD, VD/TTL Level 2.0 - 5.0 V[p-p] (high impedance)Output AUDIO L - R RCA PIN Type × 2 0.5 V[rms] (high impedance)Dimensions ( W × H × D ) 700 mm × 489 mm × 205 mm (With Pedestal)700 mm × 452 mm × 110 mm (TV only)Mass 12,5 kg Net (With Pedestal)10,0 kg Net (TV only)45SpecicationsNote• Design and Specications are subject to change without notice. Mass and Dimensions shown are approximate.• This equipment complies with the EMC standards listed below.EN55013, EN61000-3-2, EN61000-3-3, EN55020, EN55022, EN55024.