Panasonic Viera TX-26LX80F Operating Instructions Manual

Also see for TX-26LE8P: Service manual

Panasonic Viera TX-26LX80F Operating Instructions Manual Manual pdf 41 page image

FAQs, etc.• Technical Information41Input signal that can be displayedNote• Signals other than above may not be displayed properly.• The above signals are reformatted for optimal viewing on your display.• Applicable input signal for PC is basically compatible to VESA standard timing.• PC signal is magnied or compressed for display, so that it may not be possible to show ne detail with sufcientclarity.Signal name COMPONENT HDMI525 (480) / 60i 525 (480) / 60p 625 (576) / 50i 625 (576) / 50p 750 (720) / 60p 750 (720) / 50p 1,125 (1,080) / 60i 1,125 (1,080) / 50i Signal name Horizontal frequency (kHz) Vertical frequency (Hz)640 × 480 @60 Hz 31.47 59.94800 × 600 @60 Hz 37.88 60.32852 × 480 @60 Hz 31.44 59.891,024 × 768 @60 Hz 48.36 60.001,366 × 768 @60 Hz 48.39 60.04COMPONENT (Y, PB, PR ), HDMI Mark: Applicable input signalPC (D-sub 15P)PC connectionA PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV.• PC signals that can be inputted: Horizontal scanning frequency 31 to 48.5 kHz; vertical scanning frequency60 Hz (more than 768 signal lines could result in incorrect display of the image).• A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.Note• Some PC models cannot be connected to this TV.• When using PC, set the colour display quality of PC to the highest position.• For details of the applicable PC signals, see below.• Max. display resolutionAspect 4:3 1,024 × 768 pixels16:9 1,366 × 768 pixels• D-sub 15-pin connector signal167839451015 14 13 12 112 Pin No. Signal Name Pin No. Signal Name Pin No. Signal NameR GND (Ground) NC (not connected)G GND (Ground) NC (not connected)B GND (Ground) HDNC (not connected) NC (not connected) VDGND (Ground) GND (Ground) NC (not connected)