Advanced• Link Functions(Q-Link / VIERA Link)GUIDEINPUTRETURNEXITMENUASPECT OPTION DIRECT TV RECVCR1 324 657 980REC VCR DVDTEXT STTL INDEX HOLDPROGRAMMETVOKYou can control the theatre speaker with this TV remote control (point the remotecontrol at the TV’s signal receiver).• This function is available with the Amplier or Player theatre which has “HDAVI Control”function.• If you cannot operate, check the settings and the equipment “Preparations” (p. 32)Access and control the speaker volumeDirect TV RecVIERA Link MenuStartVIERA Link ControlSpeaker Selection Home CinemaRecorderPause Live TVSelect “Speaker Selection”Set to “Home Cinema” or “TV”Display “VIERA Link Menu”SpeakercontrolSpeakerSelection Features available (Using VIERA Link Menu)• This function may not work properly depending on the connected equipment.• Image or sound may not be available for the rst few seconds when the playback starts.• Image or sound may not be available for the rst few seconds when Input mode is switched.• Volume function will be displayed when adjusting the volume of the equipment.• Easy playback is also available by using the remote control for Amplier or Player theatre. Read the manual ofthe equipment.• About HDMI cable for connecting Panasonic HD Video Camera, read the manual of the equipment.• If more than one equipment of the same type are connected to the TV by HDMI cables, for example two DIGARecorders to HDMI1 and HDMI2, VIERA Link will only be available for the lower terminal number, in this caseHDMI1.• “HDAVI Control 3” is the newest standard (current as of December, 2007) for HDAVI Control compatibleequipment. This standard is compatible with conventional HDAVI equipment.Note Home CinemaAmplifier or Player theatre will beautomatically turned on if it is in Standbymode and the sound is from theatrespeakers connected to the equipment.• Volume up / down• Mute• The sound of TV speakers is mute.• When the equipment is turned off, TV speakerswill be active. TVTV speakers are active.selectset35