FAQs, etc.49On screen messagesNo Signal • Check the connection of the RF cable.DOWNLOAD IN PROGRESS PLEASE WAIT • Q-Link channel download is in progress.Feature not available • Check the Q-Link connection and setting (p. 38).• The impossible source (Component / HDMI / PC) to be record.Invalid DVB Channel • Invalid DVB channel is selected.Invalid system time. Please exit ! • Cannot get the time information. Check the connection of the RFcable.Max. number of Timers already set ! • Maximum timer programming event is 8.New DVB Service Found!Press OK start Auto SetupPress EXIT to Ignore.Selecting Auto Setup will deletecurrent Profile and Childlock settings• There is a new DVB station.New version 1.90 found.Do you really want to update thesoftware and reboot the system ?Press OK to download the new versionPress EXIT to Ignore• There is a new software available.No DVB Service found • No DVB signal can be found in Auto Setup.No module inserted • Check the CI module inserted completely (p. 27).No recording - Check Tape or Disc • The tape or disc may be “write protected”, missing or damaged.The equipment may already be recording.No recording - UNKNOWN REASON • The recording cannot be done by any reason. Check the equipment.• Disc or tape may be full.No Service • The station stops the services.Bad Signal • The signal is weak. Check the aerial.Are you sure you want to delete this timer ?Press OK to delete timerPress Exit to return • Make sure the deleting programme event is with your desire.Are you sure ? • Make sure the operation is with your desire.All tuning data will be erased • “Shipping Condition” will erase all tuning data (p. 32).• “Auto Setup” will be erased all present DVB and Analogue tuningdatas (p. 30).Message Meaning / Action• On screen messages• Frequently Asked Questions