50No stations foundPlease insert the aerial • No analogue signal can be found in Auto Setup.Tuner LockedPlease stop recording to operate • If you want to unlock, cancel Direct TV Recording (p. 38) or TimerProgramming (p. 36).Timer overlap ! • The timer programme events are overlapped. Cannot record otherchannel at the same time. Check the Starting and Ending times inTimer Programming (p. 37).Timer incorrect ! • Set Starting and Ending times in Timer Programming correctly(p. 37).Timer Event Due to Start1: BBC1 has beenProgrammed for recording at 20:00 • This message will appear 2 minutes before timer programmingevent due to start.Software successfully updatedPress EXIT to continue • The software updating is finished.Software Update failed. Please try again later.Press EXIT to continue • Perform “System Update Search Now” in System Update (p. 27).If it is still failed, there may not be the new software.Shipping condition completed.TV can now be switched off. • “Auto Setup” will automatically start when Mains power On / Offswitch is next turned On. (p. 10)Please check settings and connections onHDMI devices. • Communication error in VIERA Link function (p. 40).This service is locked!Press OK to enter PIN • The selected channel is locked in Child Lock (p. 29).Timer already expired ! • Starting time in Timer Programming is already past. Set correctly(p. 37).Recording in progress • The recording equipment is recording the programme signal fromits own tuner. You can turn the TV off and leave the equipmentrecording in the normal way.Please wait. • A function is in progress.Please check aerial or localDVB service availability.Press OK to start Auto Setup • Please follow the message.If it is still failed, consult your local Panasonic dealer.Unable to download, Check Equipment • The tape or disc is active. Stop the equipment and try again.PIN incorrect ! • The PIN number you entered is wrong.Message Meaning / ActionOn screen messages