Panasonic Viera TX-26LM70LA Operating Instructions Manual

Also see for TX-26LE7LA: Service manual Service manual

Panasonic Viera TX-26LM70LA Operating Instructions Manual Manual pdf 14 page image

1414TVTV/AVPROGRAMMEOKREC VCR DVDNEXT HDMI1/2ComponentBACKNEXTTV/AV23The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD(Digital Versatile Disc) equipment.Connect the Satellite receiver and you can watch satellite broadcasts.To connect the equipment (p. 8)Select the connectorconnected to the equipmentAV1 AV2/S-videoAV3/S-videoComponent(AV mode screen)Note• If the external equipment has an aspect adjustment function, set to "16:9".• For details, see the manual of the equipment or ask your local dealer.• HDMI (p. 23)ŶTo return to TVTV/AV• example: AV1 red Component blue yellowSelect the external inputgreenred yellow yellowblueredHDMI1/HDMI2blueDisplays the selected connector1 Turn the TV onŶWhen connecting with SCART as example 2 or 3 (p. 8 and p. 9)Receives input signals automatically when playback starts orsatellite receiver is switched on• Input signals are automatically identified by the SCART (pin 8) terminal.• This function will be available for HDMI connection too (p. 23).ŶIf input mode is not switched automaticallyPerform and• When colour bar disappears Press any coloured buttons• You can also select the connector using the TV/AV button on the front panel of the TV.Press the button repeatedly until you reach the connector to view.• Dependant on DVD/VCR setupTerminal AV1 AV2 AV3 Component HDMI1 HDMI2Manual inputselection AV1 AV2AV2S(S-video input)AV3AV3S(S-video input) Component HDMI1 HDMI2Auto inputselectionEC1/RGBAV1/RGB(RGB input)EC2/RGBAV2/RGB(RGB input) ʊ ʊ HDMI1 HDMI2Screen displayVCR / DVD switchSelect VCR to operate Panasonic VCR or DVD equipmentSelect DVD to operate Panasonic DVD equipment or Player theatreStandbySet to Standby mode / Turn onPlayPlayback videocassette / DVDStopStop the operationsRewind / Skip / SearchVCR: Rewind, view the picture rapidly in reverseDVD: Skip to the previous track or titlePress and hold to search backwardFast-forward / Skip / SearchVCR: Fast-forward, view the picture rapidly forwardDVD: Skip to the next track or titlePress and hold to search forwardPausePause / RestartDVD: Press and hold to play at slow speedProgramme Up / DownSelect programmeRecordStart recordingPanasonic equipment connected to the TV can be directly operated with the remote control.The remote control will be available for variousPanasonic equipment with the following settings.Switch to select VCR or DVD you want to changePress and hold while operatingEnter the code below (two digit code)PressVCREquipment CodeVCR 10 (default)DVD 11DVDEquipment CodeDVD 70 (default)Player theatre 71Note• After setting, execute operation confirmation.• The respective VCR / DVD code is turned to the defaultwhen battery has been exchanged. Set it again.• Depending on the model, operation may not be possible.Watching VCR, DVD and Satellites