Panasonic Viera TX-26LM70L Operating Instructions Manual

Panasonic Viera TX-26LM70L Operating Instructions Manual Manual pdf 22 page image

22Q-Link FunctionsQ-Link interlocks the TV unit and VCR / DVD recorder, enables easy recording and playback.ŶConditionŶFeatures availableWhat yousee isWhat yourecordInformation/ MessagePoweron linkand EasyplaybackPower offlinkRecording information or if recording is not possible, a message is displayed.(Only when the programme number is "0" or "AV mode" for some equipment.)When VCR or DVD recorder starts playback or direct navigator or functionmenu are activated, the TV is turned on and input mode is switchedautomatically so that you can view the content. (Only when TV is in Standbymode.)When TV is set to Standby mode, the recording equipment is also automaticallyset to Standby. (Only when the videocassette or DVD is not active.)• Use the VCR / DVD recorder with the following logos:"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic", or "SMARTLINK"• Connect the equipment to this unit’s AV1 or AV2 terminal via a "fully-wired" SCART cable. (p. 28)• Q-Link terminal setup in Setup menu (Q-Link, AV1/AV2 out). (p. 18)DIRECT TV REC DIRECT TV RECDirect TV Recording:Recording the current programme in VCR / DVD recorder immediately.• When Direct TV Recording is performed, therecording equipment is automatically turned on if itis in Standby mode.• The recording equipment is recording from its owntuner. You can turn the TV off during recording.• If, during recording from an AV source, you turn theTV off or change input / programmes, the recordingwill be stopped.• "DATA LOGIC" (a trademark of Metz Corporation) • "Megalogic" (a trademark of Grundig Corporation)• "Easy Link" (a trademark of Philips Corporation) • "SMARTLINK" (a trademark of Sony Corporation)Read the manuals of the equipment too.Some recording equipments are not applicable. Read the manuals of the equipment.ŶDownload channel settings• Perform Auto setup. (p. 21)When first using this unit, see "Auto Setup". (p. 10)• Perform download to the equipment. (p. 21)