Panasonic Viera TH-P54Z1Z Operating Instructions Manual

Panasonic Viera TH-P54Z1Z Operating Instructions Manual Manual pdf 17 page image

16Identifying ControlsDisplay UnitTuner BoxWireless UnitRemote control signal receiverDo not place any objects between the TV remote control signal receiver and remote control.●Function selectVolume / Contrast / Brightness /Colour / Sharpness /Tint (NTSC mode) / Bass / Treble /Balance / Auto Tuning (p. 32 and p. 33)Remote Pairing (p. 19)●●Power LEDStandby: redOn: greenWhen using the remote control, indicatesthe TV has received a command.●●Power LEDStandby: redOn: greenWhen using the remote control, indicates the TV has received a command.●●Mains power On / Off switchTurn the display unit On or Off.When turning Off the displayunit, tuner box will also beturned to Standby mode after1 min.●Standby switchTurn the tunerbox on or off tostandby mode●Change the channel up/down. When afunction is displayed, press up/down to adjustthe setting of the selected function. When instandby mode, switches TV on.Changes the input modeSelects channel in sequenceVolume Up / DownC.A.T.S. (Contrast Automatic Tracking System) sensorSenses brightness to adjust picture quality when“Eco Mode” in the Picture Menu is set to “On” (p. 30)●Wireless TransmitterWireless ReceiverOn and no communication : RedOn and communication state good : GreenOn and communication state not good : OrangeIndicates malfunction : Red (blinking)On and no communication : RedOn and communication state good : GreenIndicates malfunction : Red (blinking)When the orange LED is lit, check the connection and transmission range. (p.12 and P.13)When the red LED is blinking, turn the power of the tuner box and display unit off and then on again.If the problem is not resolved, consult your local Panasonic dealer.●●HDMI4 terminal(p. 50)SD Card slot(p. 41)AV4 terminals(p. 50)Headphones jack(p. 50)PC terminal(p. 50)