Basic ConnectionExternal equipment and cables shown are not supplied with this TV.Please ensure that the TV is disconnected from the mains socket before attaching or disconnectingany leads.When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socketoutlet first.There are some restrictions on placement for viewing 3D images. For details p. 22 and p. 26Mains lead (supplied)AC 220 - 240 V,50 / 60 HzAerialRF cableRear of the TVTV onlyConnecting aerialDo not put the RF cable close to the mains lead to avoid noise.● Do not place the RF cable under the TV.● To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial) and the● correct terminating plug are required.If a communal aerial system is used, you may require the correct connection cable and plug● between the wall aerial socket and the TV.Your local Television Service Centre or dealer may be able to assist you in obtaining the correct● aerial system for your particular area and the accessories required.Any matters regarding aerial installation, upgrading of existing systems or accessories required, and● the costs incurred, are the responsibility of you, the Customer.VIERA Link connection● p. 69Read the manual of the equipment, too.● Other equipment connection● p. 74, 75, 84Push until both sidetabs clickMake sure thatthe mains lead issecurely fixed.To remove from the TV:●Press both tabs and pull onmains connector to releasetabs8