Panasonic Viera TH-P50VT20Z Operating Instructions Manual

Panasonic Viera TH-P50VT20Z Operating Instructions Manual Manual pdf 24 page image

Viewing 3D imagesBasicDo not apply pressure to or scratch● the surface of the liquid crystalshutter.If the 3D Eyewear does not receive any signals from● the TV for about 5 minutes, the 3D Eyewear will beturned off automatically.Do not soil the infrared receiver section or attach stickers etc. to it.●233D EyewearPower button of the 3D Eyewear(bottom side of the 3D Eyewear)Switches the 3D Eyewear on or off.Press the button for about 1 second to turn the power● on. The power lamp lights for about 2 seconds andthen goes off.To turn the power off, press the button for about 1● second again. The power lamp flashes 3 times, thenthe 3D Eyewear turns off.Lenses - Liquid Crystal ShutterControls the images for 3D viewing.The left and right liquid crystal shutters● are alternately opened and closed intime with the images on the TV screen toachieve the 3D effect.Part names and functionsBattery coverWhen using for the first time, remove the insulating sheet.●Nose pad installation sectionIf required, attach the nose pad.To attach the nose pad● “Attaching the nose pad” (p. 25)Specialised band attaching partsIf required, attach the specialised band.To attach the band● “Attaching the specialised band” (p. 25)Infrared receiverReceives infrared signals from the TV.3D Eyewear is controlled by receiving infrared signals from the● TV, which allows you to view 3D images.To replace the battery● “Replacing the battery” (p. 24)Use either nose pad A or B for your preference.●3D Eyewear can be worn over vision correction glasses.●3D Eyewear setTY-EW3D10W●Pull the insulating sheetInsulating sheetPower lampPower button3D Eyewear Specialised band Nose pad A Nose pad B 3D Eyewear case