Panasonic Viera TH-P50VT20Z Operating Instructions Manual

Panasonic Viera TH-P50VT20Z Operating Instructions Manual Manual pdf 38 page image

How to Use Menu FunctionsAdvanced37Menu Item Adjustments / Configurations (alternatives)SetupSystem Menu ShippingCondition Resets all settings to the original condition (p. 46)SystemUpdate Downloads new software to TV (p. 47)SoftwareLicence Displays the software licence informationSystemInformation Displays the system information of this TVOther SettingsIntelligentFrameCreationAutomatically compensates the picture frame rate and removes judderingmovements to make the images smooth and clear (Off / On)Set to “Off” if noise is generated on the screen.● This function is not available for selection (default to “Off”) when “Viewing● Mode” is set to “Game” or in the mode of 3D, PC input, photo or Networkservice operations.24p SmoothFilmAutomatically compensates the picture frame rate to make the 24p sourcemovie images smooth (Off / On)This is available only for 24p signal input and displayed instead of● “Intelligent Frame Creation”.This function is not available for selection (default to “Off”) when “Viewing● Mode” is set to “Game” or in the mode of 3D, PC input, photo or Networkservice operations.3D 24p FilmDisplayReduces juddering noises of the 3D images (60Hz / 48Hz)Set to “48Hz” for the cinema-like images.● This function is available for the 3D-compatible 24p source movie.●ResolutionEnhancerEnhance the picture resolution to make the image sharper(Off / Mid / Max)Not valid on PC, VIERA CAST and Media Player● You can set this function for each input.●AutoStandbySets the time the TV automatically goes to Standby mode when no operationis performed for the selected times (Off / 2 hours / 4 hours)Automatic input switching with the connected equipment affects this● function and time-count will be reset.The notification message will appear 3 minutes before going to Standby● mode.Power Save Reduces brightness of picture to economise on power consumption(Off / On)16:9OverscanSelects the screen area for displaying the image (Off / On)On: Enlarges the image to hide the edge of the imageOff: Displays the image in the original sizeSet to “On” if noise is generated on the edges of the screen.● This function is available when aspect is set to “16:9”.● This function can be memorized separately for SD (Standard Definition)● and HD (High Definition) signals.SD Card LED Lights blue LED while SD Card is inserted (Off / On) (p. 52)DVI InputSettingChanges the black level in the image for HDMI input mode with DVI inputsignal manually (Normal / Full)When the DVI input signal from the external equipment, especially from● PC, is displayed, the black level may not be suitable. In this case, select“Full”.The black level for HDMI input signal will be adjusted automatically.●A different menu will be displayed when “Advance(isfccc)” in the Setup Menu is set to “On” or in the● mode of Media Player or Network service operations. (p. 42 and p. 52 - 68)Only available items can be selected.●