Panasonic Viera TH-P50VT20Z Operating Instructions Manual

Panasonic Viera TH-P50VT20Z Operating Instructions Manual Manual pdf 26 page image

Viewing 3D imagesBasic25Storing and cleaning the 3D EyewearUse the supplied 3D Eyewear case to store the 3D Eyewear.● Avoid storing the 3D Eyewear in hot or highly humid locations.●● Use a clean, soft and dry cloth to wipe the 3D Eyewear. Otherwise, dirt or dust may scratch the eyewear.● Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off.Do not submerge the 3D Eyewear in liquid such as water when cleaning.●Treat the rubber part carefully not to break it.●When the end of the specialised band is straightened, form a loop at the end of the band, andfix the twisted part.Fix thetwisted partAttaching the nose padUse either nose pad A or B for your preference.If you put the 3D Eyewear on vision correction● glasses, the nose pad is recommended to beremoved.You can select the positions of the nose pad● A from the 2 levels of height. Use upper 2protrusions or lower 2 protrusions on the 3DEyewear to attach the nose pad A.Use all 3 protrusions on the 3D Eyewear to● attach the nose pad B.orNose pad BNose pad AAttaching the specialised bandIf the 3D Eyewear slips out of place, use the supplied specialised band to hold it in place.Attach the band to the left and right tips of the frame, and adjust the length.●Specialised bandFrame Push to adjust thelength of the band