Accessories / Options | Basic Connection8Basic ConnectionExternal equipment and cables shown are not supplied with this TV.Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting anyleads.Connecting aerialSpecial notices for receiving digital terrestrial services• If you receive analogue and digital TV signals through two separate aerials, use an RF mixer to mix them.Analogue andDigital TV signalRF mixerAerialDigitalTVAnalogueTVAerial• If you receive analogue TV signals through a cable TV network, an aerial is required to receive digitalTV signals. In this case, using an RF mixer is not recommended because the TV signals interfere witheach other.• An RF selector is available to switch analogue and digital TV signal.Analogue orDigital TV signalAerialDigitalTVAnalogueTVCable TVnetworkRF selectorInserting and removing remote’s batteries1 OpenHook2Note the correct polarity (+ or -)CloseCaution• Incorrect installation may cause battery leakageand corrosion, resulting in damage to the remotecontrol.• Do not mix old and new batteries.• Do not mix different battery types (such as alkalineand manganese batteries).• Do not use rechargeable (Ni-Cd) batteries.• Do not burn or breakup batteries.Batteries must not be exposed to excessive heatsuch as sunshine, fire or the like.• Do not disassemble or modify the remote control.•••••••••••A15