Panasonic Viera TH-L42U30S Operating Instructions Manual

Panasonic Viera TH-L42U30S Operating Instructions Manual Manual pdf 7 page image

Accessories / Options7Installing the pedestal hole cover sheetYou need to install the pedestal hole cover sheet only if you opt to mount your TV on the wall.1 Slide the cover sheet into the pedestal hole areauntil it locks into place (follow the arrows asshown in Figure A).2 The final condition after installation is shown inFigure B.Pedestal hole cover sheetMake sure the cover sheet has covered all areaof the pedestal hole.Installation areaFigure A Figure BAttaching the pedestalWarningDo not disassemble or modify the pedestal.• Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than that provided with this TV.• Otherwise the TV or the display may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.• If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearestPanasonic dealer immediately.During set-up, make sure that all screws are securely tightened.• If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal willnot be strong enough to support the TV, and it might fall over and become damaged, and personalinjury may result.Ensure that the TV does not fall over.• If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over andpersonal injury may result.Two or more people are required to install and remove the TV.• If two or more people are not present, the TV may be dropped, and personal injury may result.Assembly screw (4)(black)Assembly screw (4)(black)Bracket BaseAssembling the pedestalUse the assembly screws to fastenthe bracket to the base securely.• Make sure that the screws aresecurely tightened.• Forcing the assembly screws thewrong way will strip the threads.Securing the TVInsert the bracket into the TV, and then fasten securelywith the assembly screws .• Tighten the four assembly screws loosely at first, thentighten them firmly to fix securely.BBFoam mat or thick soft clothDACFront