Panasonic Viera TH-L42U30S Operating Instructions Manual

Panasonic Viera TH-L42U30S Operating Instructions Manual Manual pdf 26 page image

How to Use the Menu functions26Screen Display• Off• OnTurns the screen off when you select [Off]• The sound is active even if the screen turns off.• Press any buttons (except Standby) to turn the screen on.• This function is effective in reducing power consumption when listeningto the sound without watching the TV screen.Advanced SettingsWhite Balance1R-Gain Adjusts the white balance of bright red areaG-Gain Adjusts the white balance of bright green areaB-Gain Adjusts the white balance of bright blue areaR-Cutoff Adjusts the white balance of dark red areaG-Cutoff Adjusts the white balance of dark green areaB-Cutoff Adjusts the white balance of dark blue areaReset toDefaults Press the OK button to reset to the default White BalanceGamma1 Gamma• 1.8 / 2.0 /2.2 / 2.4 / 2.6Switches the gamma curve• Please note the numerical values are reference for the adjustment.Reset toDefaults Press the OK button to reset to the default GammaResolutionEnhancer• Off• Mid• MaxEnhances the resolution to display a sharper image• Not valid when Media Player is in use.16:9 Overscan• Off• On[On]: Default - Image is overscanned by ~5% beyond the edge of thescreen to hide edge video noise[Off]: Displays image in its original size including edge video noise suchas lines, dashes, dots etc.• Applicable for video signals when TV aspect is set to [16:9]• Memorised separately for SD and HD channels / signalsAV Colour System• Auto• PAL• SECAM• M.NTSC• NTSCSelects optimum colour system based on video signals in AV modeColour Matrix• SD• HDAvailable only with 480p or 576p input on video signals in a naturalcolour from digital equipment connected to AV1 component or HDMI1 /HDMI2 / HDMI3 terminals. Select [SD] or [HD] to adjust suitable colourparameters for [SD] (standard definition) or [HD] (high definition)• [SD]: Input signal is a normal TV system• [HD]: Input signal is a high definition systemDVI Input Setting• Normal• FullChanges the black level in the image for HDMI input mode with DVI inputsignal manually• When the DVI input signal from the external equipment, especially fromPC, is displayed, the black level may not be suitable. In this case, select[Full].• The black level for HDMI input signal will be adjusted automatically.• For HDMI input mode with DVI input signal onlyReset to Defaults Press the OK button to reset the present Picture Viewing Mode of theselected input to the default settings1 : PC input mode only