14 Auto TuningSetup the wireless LAN connectionSetup the wireless LAN connection to enable the network service functions.• To setup the wireless LAN connection, the wireless LAN Adaptor is required.• Confirm the encryption key, settings and positions of your access point before starting setup.For details, read the manual of the access point.• Please note that this TV does not support wireless public access points.1 Connect the Wireless LAN Adaptor to the USB 1 or 2 portWireless LAN AdaptorAccess pointInternet environment2 Select [Yes]Start wireless LAN connection setup?Yes NoPlease connect the wireless LAN adaptor to a USB terminal. confirmselect3 Select the connection typeConnection TypePlease select network connection type.Search for access pointWPS(Push button) confirmselect • If your access point supports WPS (Pushbutton), then select this option. If not,select [Search for access point].■ [WPS(Push button)]1) Please press the ‘WPS’ button on the accesspoint until its light flashes.2) When the light is flashing select ‘Connect’ onTV.If you are unsure, please check the instructionmanual of the access point.WPS(Push button)1) Please press the ‘WPS’ button on the accesspoint until its light flashes.2) When the light is flashing select ‘Connect’ onTV.If you are unsure, please check the instructionmanual of the access point.ConnectPress the WPS button on the access point until the light flashes.And then, press the OK button to connect the Wireless LANAdaptor and the access point.• Ensure that your access point supports WPS for this method.• WPS: Wi-Fi Protected Setup™■ [Search for access point]Access points found automatically are listed.Available Access PointsNo.1 Access Point A 11n(2.4GHz)2 Access Point B 11n(5GHz)3 Access Point C 11n(5GHz)SSID Wireless type Encrypt Reception1 Select your desired access pointaccessselect • To search access points again Y• For the information of thehighlighted access pointINFOEncryption Key SettingConnection will be made with the following settings:-SSID : Access Point AAuthentication type : WPA-PSKEncryption type : TKIPPlease input the encryption key.Encryption key2 Access the encryption key input mode• If the selected access point is not encrypted, the confirmationscreen will be displayed. It is recommended to select theencrypted access point.A B C D E F G H I J K L M NU V W X Y Z 0 1 2 3 4 5 6a b c d e f g h i j k l m nu v w x y z ( ) + - . * _O P Q R S T7 8 9 ! : #o p q r s tAccess Point SettingsEncryption key 3 Enter the encryption key of the access point(Set characters one by one)selectsetStore RETURN• You can set characters by using numeric buttons.Access Point SettingsEncryption key is set to:-XXXXXXXXSelect ‘Yes’ to confirm.Select ‘No’ to change.Yes No4 Select [Yes]setselect• To re-enter the encryption key, select [No].Wireless LAN connection setup is completed• If failed, check the encryption key, settings or positions of your access point.Read the manual of the access point.• If connection to the access point is successful, we recommend you perform the[Connection Test] (p. 53).W•OFHT1