Panasonic Viera TH-L32B6A Operating Instructions Manual

Also see for TH-L50B6A: Service manual Service manual

Contents

Panasonic Viera TH-L32B6A Operating Instructions Manual Manual pdf 14 page image

Using the Menu Functions14[Reset Picture Defaults]Resets the current picture settings to defaults.Sound[Mode]Sets your favourite sound mode [Standard] / [Music] /[Speech] / [User]●The selected mode affects all input signals.[Standard]: Standard sound mode[Music]: Improves sound quality for watching musicvideos, etc.[Speech]: Improves sound quality for watching news,drama, etc.In Standard, Music and Speech modes, you canadjust the [Bass] and [Treble] settings, and thosesettings will be stored for each mode.[User]: Adjusts the sounds manually by using theequaliser– When you select [User] mode, [Equaliser] is activeinstead of [Bass] and [Treble]. Select [Equaliser] andadjust the frequency. (below)[Bass], [Treble]Adjusts the bass / treble level respectively[Equaliser]Adjusts the frequency level to suit your favourite soundquality●This function is available when [Mode] is set to [User].●Select the frequency and change the frequency levelby using the cursor buttons.●To enhance the bass sound, raise the level of the lowerfrequency. To enhance the treble sound, raise the levelof the higher frequency.●To reset the levels of each frequency to the defaultsettings, select [Reset Equaliser Settings] by using thecursor button, and then press the OK button.[Balance]Adjusts volume level of right and left speakers[Surround]Surround sound settings [On] / [Off][Auto Gain Control]Automatically regulates large sound level differencesbetween channels and inputs [On] / [Off][Volume Correction]Adjusts the volume of individual channel or input mode[Speaker Distance to Wall]Compensates for the low frequency sound due to thedistance between the speakers and the wall[Up to 30cm] / [Over 30cm]●If the distance between the TV and wall is over 30 cm,[Over 30cm] is recommended.●If the distance between the TV and wall is within30 cm, [Up to 30cm] is recommended.[MPX]Selects multiplex sound mode (if available)[Stereo]: Use this normally.[Mono]: When stereo signal cannot be received.[M1] / [M2]: Available while mono signal is transmitted.●For Analogue TV[Digital Audio Preference]Selects the initial setting for audio tracks[Dolby D] / [MPEG][Dolby D] / [HE-AAC][Dolby D]: The priority is given to Dolby Digital.[MPEG]: The priority is given to MPEG.[HE-AAC]: The priority is given to HE-AAC.●Dolby Digital is the method of coding digital signalsdeveloped by Dolby Laboratories. Apart from stereo(2ch) audio, these signals can be multi-channel audio.●MPEG is an audio compression method thatcompresses audio to the smaller size without anyconsiderable loss of audio quality.●HE-AAC is a perceptual coding method used tocompress digital audio for efficient storage andtransmission.●For Digital TV only[SPDIF Selection]SPDIF: A standard audio transfer file formatSelects the initial setting for digital audio output signalfrom DIGITAL AUDIO OUT and HDMI 2 (ARC function)terminals [Auto] / [PCM][Auto]: Dolby Digital and HE-AAC multi-channel areoutput as Dolby Digital Bitstream. MPEG is output asPCM.[PCM]: Digital output signal is fixed to PCM.●For Digital TV or video contents of Media Player[Audio Description]Narration settings for visually impaired users■ [Audio Description]Set to [Auto] to activate the narration sound track whenavailable on the broadcast [Off] / [Auto]■ [Volume]Adjusts the volume of the narration sound track■ [Speakers]Set to [On] to activate the narration sound track fromthe TV speakers [Off] / [On][HDMI1 / 2 Input]Selects to fit the input signal [Digital] / [Analogue](p. 20)[Digital]: When sound is carried via the HDMI cableconnection[Analogue]: When sound is not carried via the HDMI-DVI adaptor cable connection●For HDMI input[Reset Sound Defaults]Resets the current sound settings to defaults.Timer[Off Timer]Sets the duration until the TV automatically goes toStandby mode [Off] / [15] / [30] / [45] / [60] / [75] / [90](minutes)[Daylight Saving Time]Selects the time offset from the standard time forSummer [+1 hour] / [+1/2 hour] / [Off] / [Auto]Sti[STEpE1S●■■■■■■■■B6AZ.indd 14B6AZ.indd 14 2/1/2013 3:51:11 PM2/1/2013 3:51:11 PM