Panasonic Viera TC-P65ST60 Owner's Manual

Also see for Viera TC-P50ST60: Owner's manual Owner's manual Service manual Technical guide Technical guide

Contents

Panasonic Viera TC-P65ST60 Owner's Manual Manual pdf 25 page image

25Care and CleaningFirst, unplug the power cord plug from the wall outlet.Display panelThe front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaningcloth or a soft, lint-free cloth.If the surface is particularly dirty after cleaning up the dust, soak a soft, lint-free cloth in diluted, mild liquiddish soap (1 part mild liquid dish soap diluted by 100 times the amount of water), and then wring the cloth toremove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a drycloth of the same type until the surface is dry.Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoidcontact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of thesurface may be adversely affected.CabinetIf the cabinet becomes dirty, wipe it with a soft, dry cloth.If the cabinet is particularly dirty, soak the cloth in diluted, mild liquid dish soap and then wring the cloth dry.Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.Do not allow any mild liquid dish soap to come into direct contact with the surface of the TV.If water droplets get inside the unit, operating problems may result.Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality ofthe cabinet surface may be adversely affected or the coating may peel off.Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.PedestalCleaningWipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with waterto which a small amount of mild liquid dish soap has been added and then wipe with a dry cloth.Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage thesurface coating.Note: If using a chemically-treated cloth, follow the instructions supplied with the cloth.Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with rubber, vinyl products, or the like. (Doing so will cause deterioration.)3D EyewearClean using a soft, dry cloth.Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear. Shake offany dust from the cloth before use.Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off.Do not dunk the 3D Eyewear in liquid such as water when cleaning.Avoid storing the 3D Eyewear in hot or highly humid locations.As the liquid crystal shutters (lens) are fragile and easily broken, be very careful when cleaning them.Power cord plugWipe the plug with a dry cloth at regular intervals.Note: Moisture and dust can lead to fire or electrical shock.