11Attaching the pedestal to TVAssembly screws (black) Bracket Base(7) (for 50")(12) (for 55"/60"/65")M5 × 16Assembly screws (black) Neck(4) (for 50")M4 × 10Attaching the pedestal53124TC-P50ST60 TC-P55ST60TC-P60ST60TC-P65ST60AACDEAB(for 55"/60"/65")(for 50")Removing the pedestal from the TVBe sure to remove the pedestal in the following way when usingthe wall-hanging bracket or repacking the TV.Remove the assembly screws (for 55"/60"/65") /(for 50") from the TV.Lift the TV from the pedestal.Remove the assembly screws from the bracket.Remove the assembly screws from the bottom of thebase and pull out the neck.WarningDo not disassemble or modify the pedestal.Otherwise, the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than that provided with this TV.Otherwise, the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal when it is physically damaged, personal injury may result. Contact yournearest Panasonic Dealer immediately.During set-up, make sure that all screws are securely tightened.If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestalwill not be strong enough to support the TV, and it might fall over and become damaged, and personalinjury may result.When removing the pedestal, do not remove the pedestal by any methods other than the specifiedprocedure. (Above)Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.