15English■ About built-in wireless LAN/Bluetooth● To use the built-in wireless LAN, using an accesspoint is recommended.● To use the built-in wireless LAN in the access pointmode, up to 7 devices are connectable. But thetransfer rate will vary according to communicationenvironment or connected equipments.● Do not use the built-in wireless LAN to connect to anywireless network (SSID*1 ) for which you do not haveusage rights. Such networks may be listed as a resultof searches. However, using them may be regardedas illegal access.● Check that the Access point supports WPS*2 .(If it does not support WPS, the encryption key of theAccess point is required when configuring settings.)● Follow the instructions on the Access point setupscreen and configure the appropriate securitysettings.For more details on setting of Access point, pleaserefer to operating manual for the Access point.● We recommend using 11n (5 GHz) for the wirelesssystem between the built-in wireless LAN and Accesspoint.Communication is also possible with 11a, 11b, and11g, but the communication speed may be slower.● If the wireless system of the Access point is changed,devices that could connect by wireless LAN may nolonger be able to connect.● Data transmitted and received over radio waves maybe intercepted and monitored.● Keep the TV away from the following devices asmuch as possible:Wireless LAN, microwaves, and other devices thatuse 2.4 GHz and 5 GHz signals. Otherwise, the TVfailures such as malfunction may occur due to theradio wave interference.● When noises occur due to the static electricity, etc.,the TV might stop operating for the protection of thedevices. In this case, turn the TV Off with power On /Off switch, then turn it On again.*1 SSID is a name for identifying a particular wirelessnetwork for transmission.*2 WPS: Wi-Fi Protected SetupTo use COMPOSITE terminals(for SD picture)(Camcorder / Game system / DVD recorder / etc.)VIDEO cableAV Equipment (e.g. Camcorder)Note● In some cases, it is not possible to connectdepending on the type of cable or equipment.● The Green terminal is shared for both theCOMPONENT and COMPOSITE (VIDEO IN)connection. When using COMPOSITE (VIDEO IN)connection, the Yellow connector (VIDEO) should beinserted into Green connection.Network connection● To enable the network service functions, you need toconnect the TV to a broadband network environment.If you do not have any broadband network services,please consult your retailer for assistance.● Prepare the Internet environment for wired connectionor wireless connection.■ Wired connectionTVInternet environmentLAN cable (Shielded)■ Wireless connectionInternetenvironmentBuilt-in wireless LANAccess point