Panasonic VariCam LT Operating Manual

Also see for AU-V35LT1G: Operating instructions

Contents

Panasonic VariCam LT Operating Manual Manual pdf 91 page image

– 91 –Chapter 5 Operation — HOME screenHOME screenThe Home screen displays the basic camera settings and is used to change those settings.[FPS] Sets the frame rate.Selects from the predefined frame rate.Up to 150 (128 for [25.00p]/[50.00p]) can be registered.Presets can be added/deleted using [ADD]/[DELETE].[VFR] Toggles the variable frame rate.When this is [OFF], the frame rate become 1x the rate set in [MENU] →[SYSTEM SETTING] → [FREQUENCY].f Perform recording at the frame rate set in [FPS] when [ON]. Audio cannot berecorded.Audio can be recorded on the sub recorder side when [NORMAL+Audio] isselected in [MENU] → [SYSTEM SETTINGS] → [SYSTEM MODE] → [VFRPROXY REC].In this case, the sub recorder is in normal recording (frequency set in[SYSTEM MODE] → [FREQUENCY]) rather than recording at a variableframe rate.[COLOR] Sets the video colors (gamma and gamut).[MAIN COLOR] Sets the color of main codec video to be recorded in the main recorder.[PROXY COLOR] Sets the color of proxy codec video to be recorded in the main recorder and thesub recorder.[Grading SEL] Sets the grading function.Enabled only when [MAIN COLOR] is set to [V-Log].Use the color data (3D LUT and CDL) inside the camera recorder by selecting[Internal].Color data that is set from the grading application connected to the network canbe used by selecting [External App].[3D LUT] Sets the grading in the [3D LUT].[Grading SEL] is disabled when this is [OFF].When [Grading SEL] is set to [Internal] or [MAIN COLOR] is set to [SHADING],and [MENU] → [SCENE FILE SETTINGS] → [GAMMA] → [GAMMA SELECT]is set to [V-Log], the 3D LUT data will be read from the SD memory card.The 3D LUT data is set from the grading application connected to the networkwhen [Grading SEL] is set to [External App].f [LOAD/SAVE] allows to read from or save to the SD memory card.[CDL] Sets the grading in [CDL].[Grading SEL] is disabled when this is [OFF].When [Grading SEL] is set to [Internal]f Sets [Slope]/[Offset]/[Power]/[Saturation] on the control panel.f [LOAD/SAVE] allows to read from or save to the SD memory card.The CDL data can not be changed during recording when [Grading SEL] is setto [Internal]. The data can be changed from the grading application even whilerecording when [External App] is set.The CDL data is set from the grading application connected to the networkwhen [Grading SEL] is set to [External App].[SDI SET] Sets the display color for [SDI OUT 1]/[SDI OUT 2]/[VF SDI].The settings can only be changed when [MAIN COLOR] is set to [V-Log].[SHUTTER] Sets the shutter speed.Selects from the predefined shutter speed.Up to 12 can be registered.Presets can be added/deleted using [ADD]/[DELETE].[ON]/[OFF] It will be shutter off (opening angle 360 deg) when set to [OFF].[deg/sec] Determines the shutter setting unit.[deg]: Open angle[sec]: Second[EI] Sets the EXPOSURE INDEX (gain).[dB/ISO] Selects the setting method.[NATIVE ONLY] Only the native ISO can be selected. (when [ISO] is set)[800BASE] The ISO800 standard value can be selected. (when [ISO] is set)[5000BASE] The ISO5000 standard value can be selected. (when [ISO] is set)