– 123 –Chapter 9 Other Useful Functions — Handling setting dataHandling setting dataFile structure of the setting dataThe scene files ([SCENE1] to [SCENE5], and [SHADING]) can be saved in the camera according to the scene file number.The scene file ([SCENE1] to [SCENE5], and [SHADING]) data can be saved as a file in the SD memory card, which can be loaded and used.The setting value that can be saved as a scene file is the content of [MENU] → [SCENE FILE SETTINGS].Setting data file structure of the camera is as follows.r Scene file*1 *1 *1 *1 *1*2 *2 *2 *2 *2*1*2*3(Factory settings)The camera(Current value)(Value saved on the camera)SD memory cardScene file 1Scene file 8[SCENE1] [SCENE2] [SCENE3] [SCENE4] [SCENE5] [SHADING][SHADING][SHADING][SHADING][SHADING][SCENE1] [SCENE2] [SCENE3] [SCENE4] [SCENE5][SCENE1] [SCENE2] [SCENE3] [SCENE4] [SCENE5][SCENE1] [SCENE2] [SCENE3] [SCENE4] [SCENE5][SCENE1] [SCENE2] [SCENE3] [SCENE4] [SCENE5]*1 Select [INITIALIZE] in [MENU] → [SCENE FILE SETTINGS] → [SCENE DATA].*2 Select [LOAD] or [SAVE] in [MENU] → [SCENE FILE SETTINGS] → [SCENE DATA].*3 Select [LOAD(SD CARD)] or [SAVE(SD CARD)] in [MENU] → [FILE] → [SCENE FILE].[SCENE1] to [SCENE5], and [SHADING] at once.Handling SD memory cardsThe SD memory card can be removed and inserted, either before or after the power is turned on.Inserting SD memory cardsFig. 1 Fig. 21 Open the slot cover. (Fig. 1)2 Insert the SD memory card with the label facing forward into the sub slot, and close the slot cover. (Fig. 2)
