Panasonic VL-SWD501UBX Quick Start Manual

Also see for VL-SWD501BX: Operating instructions Quick start guide

Panasonic VL-SWD501UBX Quick Start Manual Manual pdf 2 page image

Specifi cationsModel CompositionInstalling the Main MonitorInstalling the DoorphoneInstalling the Wireless CameraVL-MWD501BX VL-V554BX (Surface mount)VL-V554UBX (Flush mount) VL-WD613BX VL-PS241Model number and name Main Monitor Station (Main monitor) Door Station (Doorphone) Wireless Monitor Station (Sub monitor) Power Supply Unit (part)Main body ChargerDimensionsPower source Power supply unit (VL-PS241)24 V DC, 0.5 APower supplied by the main monitor20 V DC, 0.23 A Rechargeable Ni-MH (AAA x 2)AC adaptor (PNLV226BX/PNLV226E)Input: 220-240 V AC, 0.1 A, 50/60 HzOutput: 5.5 V DC, 0.5 AInput: 220-240 V AC, 0.2 A, 50/60 HzOutput: 24 V DC, 0.6 APower consumption Standby: Approx. 1.4 WDuring operation: Approx. 10 W - -Standby: Approx. 0.4 W (when the submonitor is not placed in the charger)During charging: Approx. 1.4 W-Dimensions (H x W x D)(Excluding protruding sections) 180 x 165 x 21 mmVL-V554BX: 169 x 118 x 30 mmVL-V554UBX: 169 x 118 x 16.5 mm(excluding sections embedded into the wall)173 x 52 x 30 mm 43 x 81 x 76 mm 104 × 100 × 54 mmWeight 470 g VL-V554BX: 405 g, VL-V554UBX: 345 g 160 g (including the batteries) 70 g (excluding the AC adaptor) 215 gOperating environment 0 °C to 40 °C, Up to 90 % RH(Relative Humidity) non condensing-10 °C to 50 °C, Up to 90 % RH(Relative Humidity) non condensing0 °C to 40 °C, Up to 90 % RH(Relative Humidity) non condensing0 °C to 40 °C, Up to 90 % RH(Relative Humidity) non condensing0 °C to 40 °C, Up to 90 % RH(Relative Humidity) non condensingDisplay Approx. 5 inch, wide colour display - Approx. 2.2 inch, colour display - -Frequency 1.88 GHz to 1.90 GHz - 1.88 GHz to 1.90 GHz - -Option output (A contact)Rated load: 24 V AC/DC, 0.3 A or lowerMinimum applicable load: 5 V DC, 0.001 A(Output when there is a call from the doorphone)- - - -Viewing angle - Horizontally: Approx. 170°Vertically: Approx. 115° - - -Installation method Wall mount(mounting bracket supplied)VL-V554BX: surface mount(mounting base supplied)VL-V554UBX: fl ush mount(fl ush mounting box supplied)- - -IP rating / IK rating - IP54*3 / Compliant with IK07 - - -External material Flame retardant ABS and PS resin Aluminium and fl ame retardant PC+PS resin ABS resin ABS resin Flame retardant PC+ABS resinVL-WD812BX VL-FKD2BXModel number and name Wireless Sensor Camera DECT RepeaterDimensionsPower source Power supply unit (VL-PS241)24 V DC, 0.4 AAC adaptor (PQLV219BX/PQLV219E)Input: 220-240 V AC, 0.1 A, 50/60 HzOutput: 6.5 V DC, 0.5 APower consumptionDuring standby: Approx. 1.5 WDuring operation: Approx. 4.5 W (whenthe LED lights are not lit), Approx. 8 W(when the LED lights are lit)During standby: Approx. 1.5 WDuring operation: Approx. 2.3 W(when transmitting)Dimensions (H x W x D)160 x 118 x 290 mm(when the camera is front facing andincluding the wall mount bracket)82 x 111 x 39 mmWeight 960 g 88 g (excluding the AC adaptor)Operating environment-20 °C to 50 °C,Up to 90 % RH (Relative Humidity)non condensing0 °C to 40 °CUp to 90 % RH (Relative Humidity)non condensingFrequency 1.88 GHz to 1.90 GHz 1.88 GHz to 1.90 GHzInstallation method Wall mount(wall mount bracket supplied) -Transmitting range Approx. 100 m (line-of-sight distancefrom the main monitor)Approx. 100 m (line-of-sight distancefrom the main monitor)Minimum illuminance required 1 lx*1 -Image sensor 0.3 M pixel CMOS -Lighting method 2 white LED lights*2 -Angular field of view(camera angle)Horizontal: Approx. 53°Vertical: Approx. 41° -Sensor detection range• Heat sensor (when the surroundingtemperature is approx. 20°)Horizontal: Approx. 63°, vertical: Approx.20°, detection range: Approx. 5 m• Motion detection sensor Horizontal:Approx. 53°, vertical: Approx. 41°-Sensor detection method Pyroelectric infrared sensor(heat sensor) and motion detection -IP rating IP54*3 -Adjustable mounting anglesHorizontal: ±90°, vertical: facing forward- facing down approx. 60°(adjustable when mounting)-Heat sensor adjustable angles Manually adjustable to 2 angles -External material PC+ABS resin PS resinVL-SWD501BX VL-MWD501BX x 1, VL-WD613BX x 1, VL-V554BX x 1VL-SWD501UBX VL-MWD501BX x 1, VL-WD613BX x 1, VL-V554UBX x 1Attach the mounting bracket to the wall securely.Install the mounting bracket on a vertical fl at wall.MG-DHPL002EN 1406ITP/ZZZ-BX1Important– Safety Precaution: carefully read the operating instructions and installation manual before using this product.• The actual product may vary slightly from photograph.• Weights and dimensions are approximate.• Design and Specifications are subject to change without notice.• These products may be subject to export control regulations.*1 The minimum illuminance required when the camera’s [Brightness] setting is set to [+3].*2 Approx. 8.5 lx when 3 m in front of the camera, and approx. 4 lx when 3 m away and 20° to the left or right of the camera.*3 Water resistance is only assured if the camera is installed correctly according to the instructions in the Installation Guide, andappropriate water protection measures are taken. Do not install the camera in areas directly exposed to water or rain.Vertical, fl at wallScrewsHole in wall83.5 mm60 mm7 mm50 mmMounting bracketMounting base(accessory)Wire (locally procured)Wall83.5 mmScrew × 2Install the mounting base on a vertical fl at wall.• VL-V554BX (Surface mount)Mounting screws(locally procured) × 4 46 mm83.5 mmCable access holeDC cableScrews (accessory)Flush mounting box(accessory)• VL-V554UBX (Flush mount)100 mm151 mm37 mm165 mm 21 mm180 mm118 mmUp to 2 Up to 630 mm16.5 mm35.8 mm169 mm52 mm 30 mm173 mm81 mm 76 mm43 mm100 mm104 mm*Indoor use only.118 mm142 mm 94 mm290 mm160 mm111 mm 39 mm82 mmUp to 4 Up to 2

/ 2

Related manuals for Panasonic VL-SWD501BX