Panasonic VL-SWD501EX Operating Instructions Manual

Also see for VL-SWD501EX: Installation guide Operating instructions

Contents

Panasonic VL-SWD501EX Operating Instructions Manual Manual pdf 50 page image

Camera connectionsDisplay Cause & Solution Page"Cannot connect tocamera"R The camera is too far from the main monitor, or there is an object suchas a concrete wall obstructing the signal.→ Move the camera closer to the main monitor or to an area that doesnot have any obstructions. If the camera cannot be moved toanother area, installing a repeater (additional accessory) mayimprove the signal.7"Cannot transmit"11.3 Error messages - sub monitorDisplay Cause & Solution Page"Cannot connect to mainmonitor station"R The sub monitor or camera is too far from the main monitor, or thereis an object such as a concrete wall obstructing the signal.→ Move the sub monitor or camera closer to the main monitor or toan area that does not have any obstructions.If the camera cannot be moved to another area, installing arepeater (additional accessory) may improve the signal.7"Cannot connect tocamera 1"(When there are multiplecameras, the cameranumber may not be 1.)"Registration failed" R Registration to the main monitor has not been completed. Bring thesub monitor closer to the main monitor and try registering again. -5011. Troubleshooting