Panasonic VL-SWD501EX Operating Instructions Manual

Also see for VL-SWD501EX: Installation guide Operating instructions

Contents

Panasonic VL-SWD501EX Operating Instructions Manual Manual pdf 14 page image

Icon MeaningOut of range.Indicates the number of the submonitor being used.Indicates that the doorphone’sringtone volume is muted.Indicates that the camera’s ringtonevolume is muted.Indicates which doorphone iscalling, monitoring, or on a call.("1" indicates the device number.)Indicates which camera is calling,monitoring, or on a call.("1" indicates the device number.)Indicates there is a call from thedoorphone when calling,monitoring, or on a call with anotherdevice. (® page 32)Indicates there is a call from acamera when calling, monitoring, oron a call with another device. (®page 32)Indicates that "Press-to-talk" modeis on. (® page 17)Indicates that images are beingrecorded. (® page 20)Indicates that the doorphone’s LEDlights are "On". (® page 34)Soft key iconsIcon ActionDisplays menus.Executes the selected item oroperation.Returns to the previous screen.Unlocks the electric lock. (®page 29)Changes the display to zoomdisplay. (® page 33)Changes the display to wide display.(® page 33)3.4 Battery installation– USE ONLY rechargeable Ni-MH batteries AAA (R03)size.– Do NOT use Alkaline/Manganese/Ni-Cd batteries.– Confirm correct polarities ( , ).Note:R Use the supplied rechargeable batteries (Ni-MHONLY). For replacement, we recommend using thePanasonic rechargeable batteries noted on page 4.R Wipe the ends of batteries ( , ) with a dry cloth.R Avoid touching the ends of batteries ( , ) or theunit contacts.3.5 Charging the sub monitorOnly connect the charger with the supplied PanasonicAC adaptor (® page 3).AC adaptor connectionsA*1B*1 Press plug firmly.R Connect the charger to the power outlet, and thenplace the sub monitor in the charger to charge it.Charging usually takes about 8 hours.A Charge indicator– when charging: lights– when charging is completed: offB HookR Charging may take longer in the following situations.– When the operating temperature is low. (®page 43)– When the sub monitor is picked up off the chargeror used during charging.– When the sub monitor’s signal is out of range( ). (® page 14)R The sub monitor does not overcharge even if it iscontinuously placed in the charger.143. Preparation