Panasonic VL-SWD272 Quick Start Manual

Also see for VL-SWD272: Operating instructions Important information and quick guide Quick start guide

Panasonic VL-SWD272 Quick Start Manual Manual pdf 2 page image

SpecificationsModel CompositionModel number and nameVL-MWD272 VL-V522L VL-WD613 VL-FKD2Main Monitor Station (Main monitor)Extension Monitor Door Station (Doorphone) Wireless Monitor Station (Sub monitor) DECT RepeaterMain body ChargerDimensions(mm)Up to 3*1(not including the main monitor)Up to 2 Up to 6*1 Up to 2Power source 220-240 V AC, 50/60 Hz Power supplied by the main monitor Rechargeable Ni-MH (AAA x 2)AC adaptor (PNLV226)Input: 220-240 V AC, 0.1 A, 50/60 HzOutput: 5.5 V DC, 0.5 AAC adaptor (PQLV219)Input: 220-240 V AC, 0.1 A, 50/60 HzOutput: 6.5 V DC, 0.5 APower consumption Standby: Approx. 2.5 WDuring operation: Approx. 10 W - -Standby: Approx. 0.4 W (when the submonitor is not placed in the charger)During charging: Approx. 1.4 WStandby: Approx. 1.5 WDuring operation: Approx. 2.3 W(when transmitting)Dimensions (H x W x D)(Excluding protruding sections) 158 x 243 x 29.5 mm 131 x 99 x 36.5 mm 173 x 52 x 30 mm 43 x 81 x 76 mm 82 x 111 x 39 mmWeight 825 g*2 200 g 160 g (including the batteries) 70 g (excluding the AC adaptor) 88 g (excluding the AC adaptor)Operating environment Ambient temperature: Approx. 0 °C to +40 °CRelative humidity (non-condensing): up to 90 %Ambient temperature: Approx. -15 °C to +55 °CRelative humidity (non-condensing): up to 90 %(tested up to -20 °C)Ambient temperature: Approx. 0 °C to +40 °CRelative humidity (non-condensing): up to 90 %Ambient temperature: Approx. 0 °C to +40 °CRelative humidity (non-condensing): up to 90 %Ambient temperature: Approx. 0 °C to +40 °CRelative humidity (non-condensing): up to 90 %Display 7-inch wide colour / WVGA (800x480 pixels) - 2.2-inch colour / QVGA (320x240 pixels) - -Display language English, Arabic - English, Arabic - -Talking method Hands-free - Hands-free - -Frequency range 1.88 GHz to 1.90 GHz - 1.88 GHz to 1.90 GHz - 1.88 GHz to 1.90 GHzViewing angle - Horizontally: Approx. 87˚Vertically: Approx. 66˚ - - -Installation method Wall mount(mounting bracket supplied) Surface mount (mounting base supplied) - - -Minimum illuminance required - 1 lx(within approx. 50 cm from the camera lens) - - -Lighting method - Warm white coloured LED lights,Infrared LEDs - - -Transmitting range - - Approx. 100 m (line-of-sight distancefrom the main monitor) - Approx. 100 m (line-of-sight distancefrom the main monitor)IP rating / IK rating - IPX3*3- - -External material Flame retardant PC+ABS resin,Flame retardant ABS resin Flame retardant ABS resin ABS resin ABS resin PS resin24315829.59913136.552173308143761118239VL-SWD272 VL-MWD272 x 1, VL-WD613 x 1, VL-V552L x 1Installing the Main Monitor/Extension MonitorInstalling the DoorphoneImportant– Safety Precaution: carefully read the operating instructions and installation manual before using this product.• The actual product may vary slightly from photograph.• Weights and dimensions are approximate.• Design and Specifications are subject to change without notice.• These products may be subject to export control regulations.*1 When sub monitors and extension monitors are used together, a total of up to 6 sub monitors and extension monitors can be registered.*2 Including AC cord. The weight of the AC cord differs depending on the region.*3 Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.Vertical, flat wallScrewsHole in wall83.5 mm60 mm7 mm50 mmMounting bracketWood screws Mounting baseWire(User supplied)Screwdriver83.5 mmWallSide View Top View131 mm99 mmMountingbase24 mm83.5 mmImage rangeCentre ofdoorphone1450 mm650 mm1810 mm1160 mm500 mm66°87°500 mm960 mm• Installation PositionDISTRIBUTED BY :MG-DHPL020EN 1608ITP/ZZZ-1158 mm243 mmMounting bracketMain Monitor58 mm83.5 mm

/ 2

Related manuals for Panasonic VL-SWD272