9 Select whether to use SMTP authentication or not® .10 If you selected “Disable”Continue to the next step.If you selected “Enable”a. Enter the account name ® select ®.b. Enter the password ® select ® .R See page 23 for entering text.11 Confirm the message ® .R A test message is sent to the specified emailaddress. Confirm that the message has arrived atthe specified email address.Note:R See page 23 for information about entering text.8.5.3 Registering the notification emailaddressesYou can register up to 4 email addresses that will be usedto receive notifications from the main monitor.1 Top menu ® ® .2 Select “Network” ® .3 Select “Email settings” ® .4 Select “Email notification address” ®.5 Select a memory location number ® .6 Enter the email address ® select ®.R See page 23 for information about entering text.7 Confirm the message ® .R A test message is sent to the specified emailaddress.8 Confirm that the message has arrived at the specifiedemail address ® .R The email address is registered and “Emailnotification” is automatically enabled.R To register more email accounts, repeat thisprocedure from step 4.8.5.4 Enabling/disabling email notifications“Email notification” is automatically enabledwhen the email server and email addresses areregistered. If you do not want notifications to be sent, forexample when you are home, follow the steps below todisable notifications.1 Top menu ® ® .2 Select “Network” ® .3 Select “Email settings” ® .4 Select “Email notification” ® .5 Select “Disable” ® .R Select “Enable” to enable notifications.Note:R The status of the email notification feature isdisplayed in the top menu, see "Status icons" inpage 10.8.5.5 Selecting devices to trigger emailnotificationsYou can select which devices, doorphones, or sensors,will trigger email notifications.1 Top menu ® ® .2 Select “Network” ® .3 Select “Notification selection” ® .4 Select the desired device ® .5 Select “Enable” ®R Select “Disable” to disable notifications for theseleted device.268. Wi-Fi, mobile devices, and email