Preparation7Monitor displayThe following display is an example for description purposes, and it may differ from the actual display.LThe monitor display is turned off during standby.A Indicates which door station is calling, monitoring, orin a call. Also indicates which door station took theimage while viewing it.(Example): Door station 1B Indicates which door station is calling while talking ormonitoring (page 12).(Example): Door station 2C : Indicates that the main monitor station is ina call (page 10).: Indicates that the main monitor station ismonitoring outside (page 13).: Indicates that one of the PBX extensionsconnected to the main monitor station isbeing used for a call from the door station.D Indicates an image is being taken by the door station.E Indicates that the “Press-to-talk” mode is on (page11).F Indicates that the door is opened when the dooropener (sold separately) is connected to the mainmonitor station (page 11).A B EFC DLThe above display is an example fordescription purposes, and it may differ fromthe actual display.LThe display varies depending on theoperation.N Operation guidance and button guidance(Example)Operation guidanceThe example means that pressing the {TALK/OFF}button ends the call.L If you set “OPERATION GUIDE SETTINGS” to“OFF”, you can always hide the operation guidance(page 23).Button guidancePress the button for the function directly above it.Example: To operate “rREC”, press {PLAY}.In these Operating Instructions, the button andfunction displayed above are indicated as follows.Press {PLAY} (rREC).To hide the guidance that overlaps the image:When the display shows images (for example, during a call and while monitoring), you can temporarilyhide the guidance to easily view the whole image. (See “Hiding the guidance” on page 11.)DOOR KEY● RECMONITORMENUPRESS [TALK/OFF] TO FINISHThe displayed function is not stated when thecorresponding button name means the same as thedisplayed function.