Doorphone11Features during a call or while monitoringAdjusting the display brightness1 Press {MENU}, then select “BRIGHTNESS” bypressing {MENU} (▲ SELECT).2 Adjust the brightness by pressing {MONITOR}(DARK) or {PLAY} (BRIGHT).Hiding the guidanceYou can hide the operation guidance and buttonguidance (page 7).1 Press {MENU}, then select “GUIDE OFF” bypressing {MENU} (▲ SELECT).2 Press {MONITOR} (OK).LThe guidance disappears from the displaytemporarily. It reappears when you performanother operation.Adjusting the volume of your voiceheard at the door stationYou can adjust the volume of your voice heard at thedoor station by setting the main monitor station.1 Press {MENU}, then select “OUTGOING VOL” bypressing {MENU} (▲ SELECT).2 Adjust the volume by pressing {MONITOR} (-) or{PLAY} (+).Adjusting the speaker volume1 Press {MENU}, then select “INCOMING VOL” bypressing {MENU} (▲ SELECT).2 Adjust the volume by pressing {MONITOR} (-) or{PLAY} (+).If it is diffi cult to hear the visitor’s voice due to noise (Press-to-talk mode)You can speak with the visitor alternately by pressing {TALK/OFF} to switch between the talking mode and thereceiving mode.1 Press and hold {TALK/OFF} for about 2 seconds during a call until a beep sounds.L appears on the display.2 To speak to the visitor: Speak while pressing and holding {TALK/OFF}.To hear the visitor: Release {TALK/OFF}.NTo end the conversation:Tap {TALK/OFF} (for 0.8 seconds or less).Note:LPress-to-talk mode is canceled after the conversation ends.Using {DOOR KEY} buttonWhen a separate door opener is connected to the main monitor station, you can open the door using the mainmonitor station.1 To open the door, press {DOOR KEY} after answering a call from the door station or while monitoring imagestaken by the door station.LWhen the door is opened, is displayed.LDoor opener allows you to open the door for the time specified in “Setting {DOOR KEY} button” on page20.Note:LYou cannot open the door while receiving a call from the door station.LWhen using 2 door openers:You can open door 1 (door opener 1) when you are talking with door station 1 or monitoring it. You can opendoor 2 (door opener 2) when you are talking with door station 2 or monitoring it.