Programming23Item (function) SettingRECORDING/PLAY SETTINGSDOOR STATIONAUTO RECORDINGDOOR STATION 1: ON, OFFDOOR STATION 2: ON, OFFLWhen receiving calls from the door station, images are automatically recorded.DELETE ALLPICTURESDELETE ALL PICTURES, BACKLTo erase all recorded images, select “DELETE ALL PICTURES”.CONNECTED DEVICE SETTINGSDOOR STATIONCONNECTIONDOOR STATION 1: YES, AUTO, NODOOR STATION 2: YES, AUTO, NOLYou can select the setting of the door station.LSelect “NO” for the door station that is not in use.LOBBYCONNECTIONGenerally, it is unnecessary to change this setting. This is for apartmentcomplexes. Only if an optional lobby station is connected to the main monitorstation (page 3), change the setting to “YES”.YES, NODOOR KEY DOOR KEY 1: 2 SEC OPEN, 3 SEC OPEN, 4 SEC OPEN, 5 SEC OPEN,6 SEC OPEN, 7 SEC OPEN, NOT CONNECTEDDOOR KEY 2: 2 SEC OPEN, 3 SEC OPEN, 4 SEC OPEN, 5 SEC OPEN,6 SEC OPEN, 7 SEC OPEN, NOT CONNECTEDLYou can select how long the door remains open when the door opener (soldseparately) is connected to the main monitor station (page 20).OTHER SETTINGSOPERATIONGUIDE SETTINGSON, OFFLSelect “OFF” to always hide the operation guidance (page 7) shown on thebottom of the display.INITIALIZESETTINGSINIT + DEL ALL PICTURES, ONLY INITIALIZE SETTINGS, BACKLThis function resets the settings of the main monitor station to the defaultsettings.LThe following settings are not affected:– Lobby connection settingsDEMO MODE Do not use this setting unless the device is being used in a sales display.ON, OFF