Doorphone13Monitoring the outside (Door station monitor)You can monitor the sound and image taken by the door station.LIf an optional lobby station is connected to the main monitor station (page 3), you cannot monitor outsidewhere the lobby station is located.{MENU}{TALK/OFF}{MONITOR}1 Press {MONITOR}.L appears on the display.LThe outside image will be shown on the display, and you will hear the sound from outside.(The sound from your end will not be heard at the door station.)2 To end monitoring, press {TALK/OFF}.N When installing 2 door stationsWhen you press {MONITOR} in step 1, the following is displayed.Press {MENU} (▲ SELECT) to select the desired door station,then press {MONITOR} (OK).Note:LMonitoring will automatically end in about 90 seconds.LTo talk to the visitor at the door station, press {TALK/OFF} to end monitoring, then press {TALK/OFF} again.LYou can perform the following operations during monitoring. For more details, see page 11.– Adjusting the display brightness– Hiding the guidance– Adjusting the speaker volumeWhen using an additional door station:LWhen you receive another call from the other door station while monitoring, see page 12.SELECT DOOR STATIONDOOR STATION 1DOOR STATION 2