Panasonic VL-MV26 Operating Instructions Manual

Also see for VL-MV26: Installation guide Manual Installation guide

Contents

Panasonic VL-MV26 Operating Instructions Manual Manual pdf 8 page image

Note:R Press-to-talk mode is cancelled when the call ends.4.3 Monitoring the outside withthe lobby station or cameraYou can monitor the sounds and images from a lobbystation or camera.1 Press .R If there are multiple devices, select the desireddevice ® .R The images from the device are displayed.R If a camera is connected to the lobby station, youcan alternate monitoring between the lobbystation and camera by pressingCAMERA orLOBBY.2 When finished, press M/OFF N.Note:R The sound from your end will not be heard at thelobby station.R Monitoring sessions are disconnected after thepre-programmed "timeout" time elapses.R After finishing monitoring you cannot monitor againfor about 10 seconds.R Depending on the composition of the system, somelobby stations may not be able to be monitored frommain monitors. In this case, consult the installer oryour facility staff.Features available while monitoring– Recording lobby station images (page 9)– Turn on or off the operation guide (page 9)– Adjusting sound and display settings (page 9)4.4 Opening entrance doorsAn electric lock may be connected to the lobby station.In this case, you can open the entrance door while talkingto a visitor or monitoring with a lobby station or camera.To open the entrance door while talking or monitoring,press .4.5 Lift permissionsA lift controller may be connected to the system. In thiscase, visitors will be allowed to use the lift to visit yourfloor after you have opened the entrance door.Depending on how the system is configured by thebuilding manager, the visitor will not be allowed to usethe lift to visit other floors.4.6 Calling extension telephones1 Press M/OFF N.2 Select the desired extension telephone.R Up to 4 extension telephones may be displayed.3 Press ® .4 When finished, press M/OFF N.Note:R For information about the extension telephonesavailable in your building, contact the facility staff.Features available while talking– Adjusting sound settings (page 9)– Using "press-to-talk" (page 7)4.7 Door bellsA door bell may be connected to your main monitor. Inthis case, the main monitor will ring when someonepresses the door bell button. See page 11 for door bellsettings.Note:R The main monitor will not ring while the settings menuis displayed.4.8 Emergency callsAn emergency call button may be connected to yourmain monitor. If the call button is pressed, your mainmonitor can automatically call facility staff to alert themto the situation. This is called an "emergency call".When the emergency call is answered, you can talk withthe facility staff.4.9 Recording imagesThe main monitor can record lobby station and cameraimages (still images). It can save images from up to 30calls or monitoring sessions.4.9.1 Recording automatically (recording areceived call)When a visitor calls you, the main monitor records 1image automatically (whether you answer the call or not).Recording starts about 2 seconds after you receive thecall.When you do not answer a callThe recorded image is saved as an unplayed image, andthe notification indicator flashes.When the memory is full (auto image updating)When the memory is full, new images overwrite theoldest images automatically. This occurs even if theoldest images are unplayed images.84. Operations