3.1 Controls3.1.1 Main monitorj31894 5 6 72Display (page 7)MicrophoneNotification indicator (red)Flashes when there is a recorded image that has notbeen viewed. The indicator stops flashing when theimage is played.Play button ( )Press to display the image playing screen when themain monitor is idle.It can also be used as a soft key (page 6).Monitor button ( )Press to monitor the outside when the main monitoris idle.It can also be used as a soft key (page 6).Information button ( )Press to display the information screen when themain monitor is idle.It can also be used as a soft key (page 6).Settings button ( )Press to display the setting screen when the mainmonitor is idle.It can also be used as a soft key (page 6).SpeakerTALK/OFF button (M/OFF N)RESET buttonIf the main monitor cannot be correctly operated,press the MRESETN button with a pointed object toreset the main monitor. (Recorded images andconfigured settings are not affected.)3.1.2 Soft keys1CAMERAC12DStatus icons (page 7)Displayed imageSoft key iconsIndicate the item that will be selected when you pressthe soft key directly under each icon. The icons thatare displayed vary depending on current screen andoperation.Soft keysSelect the items displayed on the screen directlyabove each soft key.3.2 Setting the date and timeIf the date and time are not set you will be prompted toset them.1 Press or .2 Set the date and time.R Press or to change the setting.R Press to select the next item (i.e., year,month, day, etc.).3 When finished, press .R A beep sounds and the display turns off.Changing the date and timeYou change the date and time settings later if desired.See page 11.Note:R The date and time settings may be deleted whenthere is a power outage. In this case, reconfigure thesettings.R The time may become out of sync over time (about60 seconds per month).63. . Preparation3. Preparation