Panasonic VIERA TC-P50XT50 Owner's Manual

Also see for VIERA TC-P42XT50: Service manual Manual de usuario

Contents

Panasonic VIERA TC-P50XT50 Owner's Manual Manual pdf 32 page image

32IP address/DNS settingsSelect “IP/DNS setting mode” and set to“Automatic”(When IP/DNS automatic acquisition in DHCP can beused)IP address/DNS settingsIP setting modeIP address 192.168.0.5Subnet mask 255.255.255.0Default gateway 192.168.0.254DNS setting mode AutomaticDNS 192.168.0.20AutomaticMenuPictureAudioTimerNetworkThe acquired address is displayed.selectOKEach IP address is acquired automaticallyIf you are using a broadband router, IP automaticacquisition in DHCP can be used under normalcircumstances. If you are not sure, check with the personwho installed the equipment, or check the instructions foreach device.■Manual settingSelect “IP/DNS setting mode” and set to “Manual”Select the item and press OKCheck the specifications of the broadband router andenter each IP address.Or Enter each IP address as was specified by theproviderIP address OK10 I0 . 0 . 0 . 0Proxy settingSet only if specified by the provider. It is not required for normal household use.Select “Proxy setting”MenuPictureAudioTimerkIP address/DNS settingsIP setting modeIP address 192.168.0.5Subnet mask 255.255.255.0Default gateway 192.168.0.254DNS setting mode AutomaticDNS 192.168.0.20Proxy settingAutomaticNetworkselectOKSelect item and press OKselectOKMenuPictureAudioProxy settingProxy address0Proxy portEnter address or port number and press OK■Proxy addressThis is the address of the relay server that is connectedto the target server instead of the browser and sendsdata to the browser. Setting is only required if specifiedby the provider.■Proxy portThis number is specified by the provider together with theProxy address.Network link■Edit the name of this TVSets your favorite name for this TV. This namewill be used to display the name of this TV onthe screen of the other Network compatibleequipment.Select “VIERA network name”MenuPictureAudioNetworkNetwork linkVIERA network nameDLNA remote control EnableVIERADLNA remote volume controlNetwork remote control EnableEnableselectOKEdit the name and press OK■Switches DLNA remote control (Disable/Enable)Switches DLNA remote control “Disable” or “Enable”selectDLNA remote control Enable■Volume setting in DMR operation (Disable/Enable)Sets volume setting in DMR operation• Available only when “Enable” is selected in “DLNA remotecontrol”selectDLNA remote volume controlEnable■Switches Network remote control (Disable/Enable)Switches remote control of network device like smartphone“Disable” or “Enable”.selectNetwork remote control Enable