Panasonic VIERA TC-P50XT50 Owner's Manual

Also see for VIERA TC-P42XT50: Service manual Manual de usuario

Contents

Panasonic VIERA TC-P50XT50 Owner's Manual Manual pdf 14 page image

14orTurn the TV On with the POWER buttonor(Remote)(TV)Setup the following items● Select your language● Select your country● Select your viewing mode (Be sure to select “Home Use”)If you select “ Store Demonstration” by mistake, confirmation screen will bedisplayed.To display the “Set viewing mode” screen again and select “Home Use”, do one ofthe following:• Press and hold down the rear POWER button for at least five seconds.• Unplug power cord for 30 seconds and plug in again.● ANT/Cable setupSelect and set the settings according to your ANT/Cable environment.Select “Yes” on the confirmation screen, to start the scanning process.After scanning is finished completely, press OK to continue.● Label the inputs for easy identificationTo name each input, follow the instructions on screen.When done, select NEXT and press OK to go to the next step.(Input select: Refer to Watching content from external devices (p. 17))● Configure Network settingsSelect the Network type and select the setting mode.If you select “Wireless (WiFi)”, start “Wireless network settings”Select “Automatic” or set “Manual” setting, start connection test.When you complete “Network settings” successfully, the completion screen will bedisplayed.● Adjust the ClockSelect the clock mode and set other settings.When “Auto” is selected, clock will be set automatically according to Time zone andDST.Complete First time setupCompletion screen is displayed.You can repeat the First time setup• Press MENU --> Setup --> First time setupTo watch TV via a Cable box, Satellite receiver, or any other source (DVD, DVR,gaming device, etc.), press the INPUT button and select the appropriate input.First Time SetupThe first time setup screen is displayed only when the TV is turned on for the first time, after the power cordis inserted into a wall outlet and the “Auto power on” is set to “No”.(Press MENU --> Setup --> Advanced setup --> Auto power on)