Panasonic VIERA TC-P50XT50 Owner's Manual

Also see for VIERA TC-P42XT50: Service manual Manual de usuario

Contents

Panasonic VIERA TC-P50XT50 Owner's Manual Manual pdf 31 page image

31Network settingsThis is a setting for connecting to a broadband environment.Select “Network”Select the settings and setselectadjustMenuPictureNetworkAudioTimerLockSetupNetworkSoftware updateOnline Movies settingsNew software noticeNetwork statusConnection testNetwork connectionWireless network settingsIP address/DNS settingsNetwork linkWireless (WiFi)OnConnection testCheck that the Network settings are as shown below, and then start “Connection test”.Select “Connection test” and press OK(It takes a while to cancel the test.)Displayed Connection test screenConnection testCheck Ethernet cable connectionValidate IP addressCheck for IP address duplicationCheck connection to the InternetChecking communications with server.Test in progress...Complete Connection testSuccess -->Completion screen is displayed.Error-->Follow the directions on screen to complete the setting.If you perform the Proxy settings, check the Proxy addressand the Proxy port number.Network connectionSelect Network type (Ethernet cable/Wireless (WiFi))Wireless network settings■Sets/Changes wireless network settingsPress “Wireless network settings” and display Wireless networksOr select connection method (below) with color key.Follow the directions on screen to complete the settingWPS Push WPS PIN Manual settings Search againRETURNOKSelect your wireless network.Wireless networksSelect0024A5C1C1FE_A-1 11n(5GHz)11n(5GHz)0024A5C1C1FE_AWireless type StatusNetwork name (SSID)sssss 11n(5GHz)001D73C528A0_G 11g(2.4GHz)001D73D24884 11n(2.4GHz)001D73D24884-2 11n(2.4GHz)selectOK* Wi-Fi Protected Setup is an easy setting of the Wi-FiAlliance’s certification● For more details on setting of an Access point, pleaserefer to operating manual for the Access point.WPS (Push button):You can connect the Access point by pressing thisbutton.WPS (PIN):Set the PIN code that is displayed on the TV on theAccess point.Manual settings:Manually set SSID, Security type, and Encryption typeto match the settings of the Access point to which toconnect.Search Again:Search again an available wireless network within therange.● When connecting by 11n (5 GHz), select “AES” as theEncryption type for the wireless LAN.Using Network services Advanced