8AccessoriesAssembly screws(4 of each)AXYN5+F18FNsize (M5 × 18) (Silver)BTHEL080Nsize (M5 × 30) (Black)Poles (2)(L) TBLA3680(R) TBLA3679L RL or R is printed at thebottom of the poles.Base (1)TBL5ZX0337 (for 50”)TBL5ZX0338 (for 42”)Attaching the pedestal to TV■Assembling the pedestalFix securely with assembly screws A (Total 4 screws).Tighten screws firmly.ALRPoleFrontPoleBase■Set-upTighten assembly screws B (total 4 screws) loosely at first, then tighten themfirmly to fix securely.BFix securely with assemblyscrews B (Total 4 screws).Rear sideArrowmarkPoleHole for pedestalinstallationPoleBaseBottom viewWork on a flat surfaceRemoving the pedestal from the TVBe sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.Remove the assembly screws B from the TV.Lift the TV from the pedestal.Remove the assembly screws A from the pole.WarningDo not disassemble or modify the pedestal.Otherwise, the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than that provided with this TV.Otherwise, the TV may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest PanasonicDealer immediately.During set-up, make sure that all screws are securely tightened.If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strongenough to support the TV, and it might fall over and become damaged, and personal injury may result.When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (above)Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.