Setting Date and TimeSet the current date and time so that the date and time at which you make a recording can be recordedcorrectly.The following procedure can also be used to correct the date and time you have already set.P re ss !_1_ / _ll_|/'ql_l/l_l_ buttonsto select, and then press I_/11 toactivate.1Turn the DVD Video Camera on.2 Press the MENU button.The menu screen willappear.I _)ENTER(_}RETURfl "3 Press the 1_14/D,,I_buttonto choose "Date Setup"and then press thebutton to choose "DateSet". I :_)ENTER(_}R[TURN _,:RAMI4 Press the 1_ button.The figure for the monthwill be selected.[The digit that ishighlighted first depends I_)ENTER(_R_TURN "_relon the date display format(set up in Date Mode): The digit on the left end ofthe date display will be highlighted first.]Note:After highlighting the month, press the _ / _1_,1buttonto change the month.If you press the-/ll buttonafter changingthe month,thescreen for verifying the setdate will appear instead of the screen for setting day.year or time.5 Press the _ / _ button to change the month.Press the _ / I,.1_button to move the highlightto the day of the month, then repeat step 5 to setthe current date and time.Note:To stop date/time setting midway,press the • button.6 After setting the currentdate and time, press the,/ll button.The screen for verifyingthe set date will appear.7 If the displayed date and time are correct, use thecontrol buttons to choose "YES", and then pressthe I_/11 button.The date and time will be set, and the DVD VideoCamera will enter recording pause mode.Choosing "NO" will restore the menu screen.Important Note:This DVD Video Camera incorporates a rechargeablebattery to store the date and time in memory. If thisbuilt-in battery is exhausted, the date and time will bereset. To prevent this, connect the AC adaptor to DVDVideo Camera every 3 months, and leave it to chargefor at least 24 hours with the DVD Video Camera tu rnedoff: The built-in battery will be charged,4O